Manual

iii
specific battery information. The battery is marked
with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier
or to a designated collection point. For more
information see: www.recyclethis.info.
According to the Batteries and Accumulators (Placing
on the Market) Regulations 2008 and the Waste
Batteries and Accumulators Regulations 2009: This
product contains a battery that cannot be disposed of
as unsorted municipal waste in the United Kingdom.
See the product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated
collection point. For more information see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003 (B)
standards requirements.
Cet appareil répond aux exigences des normes CAN ICES-
003 (B)/NMB-003 (B).
KC
B
급 기기
:
이 기기는 가정용
(B
급
)
전자파적합기기로써 주로 가정에서 사용하는 것을
목적으로 하며
,
모든 지역에서 사용할 수 있습니다
.
Safety Instruction
The symbols that may be found in this document are
defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation
which, if not avoided, will or could
result in death or serious injury.
Caution
Indicates a potentially hazardous
situation which, if not avoided,
could result in equipment
damage, data loss, performance
degradation, or unexpected
results.
Note
Provides additional information to
emphasize or supplement
important points of the main text.
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
Laws and Regulations
● Use of the product must be in strict compliance with
the local electrical safety regulations.
Transportation
● Keep the device in original or similar packaging while
transporting it.
● Keep all wrappers after unpacking them for future use.
In case of any failure occurred, you need to return the
device to the factory with the original wrapper.
Transportation without the original wrapper may result
in damage on the device and the company shall not
take any responsibilities.
● Do not drop the product or subject it to physical shock.
Keep the device away from magnetic interference.
Power Supply