Manual

v
radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright
light.
● When any laser equipment is in use, make sure that the
device lens is not exposed to the laser beam, or it may
burn out.
● The device is suitable for indoor and outdoor uses, but
do not expose it in wet conditions.
● The level of protection is IP 54.
● The pollution degree is 2.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power cable,
and contact the service center.
Laser Light Supplement Warning
Warning: The laser radiation
emitted from the device can
cause eye injuries, burning of
skin or inflammable
substances. Prevent eyes from
direct laser. Before enabling the Light Supplement
function, make sure no human or inflammable
substances are in front of the laser lens. The wave
length is 650 nm, and the power is less than 1 mW. The
laser meets the IEC60825-1:2014 standard.
Laser maintenance: It is not necessary to maintain the
laser regularly. If the laser does not work, the laser
assembly needs to be replaced in the factory under
warranty. Keep the device power off when replacing
laser assembly. Caution-Use of controls or adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
Manufacture Address:
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing
Subdistrict, Binjiang District, Hangzhou, Zhejiang 310052,
China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might
be subject to export controls in various countries or
regions, including without limitation, the United States,
European Union, United Kingdom and/or other member
countries of the Wassenaar Arrangement. Please consult
your professional legal or compliance expert or local
government authorities for any necessary export license
requirements if you intend to transfer, export, re-export
the thermal series products between different countries.