User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Download the Mobile Client
- Chapter 3 Log in to Device
- Chapter 4 Live View
- Chapter 5 Picture and Video Management
- 5.1 View Pictures
- 5.2 Switch Thermal/Optical View for Captured Picture
- 5.3 Set Thermometry Parameters for Captured Picture
- 5.4 Measure Spot's Temperature for Captured Picture
- 5.5 Measure Frame's Temperature for Captured Picture
- 5.6 Set Alarm Temperature for Captured Picture
- 5.7 Set Palettes for Captured Picture
- 5.8 Generate Report
- 5.9 View Videos
- 5.10 Share Pictures and Videos
- 5.11 Delete Pictures and Videos
- Chapter 6 Local Settings
- A. Common Material Emissivity Reference
HIKMICRO Smartphone Module User Manual
6
The emissivity of the surface of a material is its effectiveness in
emitting energy as thermal radiation. See Common Material
Emissivity Reference for emissivity of common materials.
Set the straight-line distance (unit: m) between the target and the
device.
4.3 Measure Spot's Temperature in Live View
The software can locates the spot with the highest temperature, the spot with the lowest
temperature, and the center spot on the live video image. You can view the above-mentioned
spots' real-time temperatures during live view.
Note
If you have started live view for a long time, you should tap to calibrate the device first to
ensure the accuracy of the temperature measurement.
Center Spot Thermometry
Tap → to display the real-time temperature of the center spot of the live video image as
. And tap the icon again to hide the temperature.
Hot Spot Thermometry
Tap
→ to display the spot with the highest temperature as and its real-time
temperature as on the image. And tap the icon again to hide the spot and its
temperature.
Cold Spot Thermometry
Tap
→ to display the spot with the lowest temperature as and its real-time
temperature as on the image. And tap the icon again to hide the spot and its
temperature.
Custom Spot Thermometry
Tap
→ to display the custom spot with its real-time temperature as
on the image. You can drag to move the spot to get real-time temperatures
at different locations. And tap
to delete the spot.
Note
● For Temperature Screening Smartphone Module, you can set only one spot on the live video
image.