User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Download the Mobile Client
- Chapter 3 Log in to Device
- Chapter 4 Live View
- Chapter 5 Picture and Video Management
- 5.1 View Pictures
- 5.2 Switch Thermal/Optical View for Captured Picture
- 5.3 Set Thermometry Parameters for Captured Picture
- 5.4 Measure Spot's Temperature for Captured Picture
- 5.5 Measure Frame's Temperature for Captured Picture
- 5.6 Set Alarm Temperature for Captured Picture
- 5.7 Set Palettes for Captured Picture
- 5.8 Generate Report
- 5.9 View Videos
- 5.10 Share Pictures and Videos
- 5.11 Delete Pictures and Videos
- Chapter 6 Local Settings
- A. Common Material Emissivity Reference
HIKMICRO Smartphone Module User Manual
7
● For Thermographic Smartphone Module, you can set up to 3 spots on the live video image.
4.4 Measure Frame's Temperature in Live View
You can set frames on the live video image and the software will measure the highest temperature,
lowest temperature, and average temperature in the frame.
Steps
Note
If you have started live view for a long time, you should swipe the toolbar to the right and
then tap
to calibrate the device first to ensure the accuracy of the temperature
measurement.
1. Tap → on the toolbar to set a frame on the live video image.
Note
● You can set up to 3 frames on the live video image.
● For Temperature Screening Smartphone Module, you can set only one frame on the live
video image.
2. Optional: Edit the frame.
Move Frame
Drag the frame to move it.
Delete Frame
Tap Delete above the frame to delete it.
Adjust Shape and
Size
Drag a vertex of the frame to adjust the frame's shape and size.
You can also spread fingers apart and pinch them together inside the
frame to adjust its shape and size.
3. Tap areas outside of the frame on the image to confirm the frame settings.
The highest temperature, lowest temperature, and average temperature in the frame will be
displayed.
Figure 4-1 Frame's Temperature