User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Download the Mobile Client
- Chapter 3 Log in to Device
- Chapter 4 Live View
- Chapter 5 Picture and Video Management
- 5.1 View Pictures
- 5.2 Switch Thermal/Optical View for Captured Picture
- 5.3 Set Thermometry Parameters for Captured Picture
- 5.4 Measure Spot's Temperature for Captured Picture
- 5.5 Measure Frame's Temperature for Captured Picture
- 5.6 Set Alarm Temperature for Captured Picture
- 5.7 Set Palettes for Captured Picture
- 5.8 Generate Report
- 5.9 View Videos
- 5.10 Share Pictures and Videos
- 5.11 Delete Pictures and Videos
- Chapter 6 Local Settings
- A. Common Material Emissivity Reference
HIKMICRO Smartphone Module User Manual
8
4. Optional: Tap the image and then tap the frame to edit the frame again.
4.5 Set Palettes for Live Video Image
The palette is the color scheme used to display a thermal image. You can select different palettes
modes, including white hot, black hot, fusion, rainbow, ironbow, red hot, and rain.
Tap and then select a palettes mode.
White Hot
The hot part is light-colored in view.
Black Hot
The hot part is black-colored in view.
Rainbow
The target displays multiple colors, it's suitable for scene without obvious temperature
difference.
Ironbow
If the color is close to yellow, the temperature is high. If the color is close to purple, the
temperature is low. In this mode, the target object's outline is clear and the hotspot is easy to
find. This mode is usually applied to the power industry.
Red Hot
The hot part is red-colored in view.
Fusion
The hot part is yellow-colored and the cold part is purple-colored in view.
Rain
The hot part in the image are colored, and the else is blue.
4.6 Manually Record Video and Capture Picture
You can record video manually and capture pictures during live view.
Steps
1. Log in to the device.
Note
See Log in to Device for details.
2. Record video or capture pictures.
Capture Picture
● Tap Picture → to capture a picture.