User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Download the Mobile Client
- Chapter 3 Log in to Device
- Chapter 4 Live View
- Chapter 5 Picture and Video Management
- 5.1 View Pictures
- 5.2 Switch Thermal/Optical View for Captured Picture
- 5.3 Set Thermometry Parameters for Captured Picture
- 5.4 Measure Spot's Temperature for Captured Picture
- 5.5 Measure Frame's Temperature for Captured Picture
- 5.6 Set Alarm Temperature for Captured Picture
- 5.7 Set Palettes for Captured Picture
- 5.8 Generate Report
- 5.9 View Videos
- 5.10 Share Pictures and Videos
- 5.11 Delete Pictures and Videos
- Chapter 6 Local Settings
- A. Common Material Emissivity Reference
HIKMICRO Smartphone Module User Manual
15
Figure 6-3 Frame's Temperature
5.6 Set Alarm Temperature for Captured Picture
Alarm temperatures are the threshold temperatures for highlighting the parts with temperature
exceptions in a captured picture. The temperature exceptions occur when there are temperatures
higher/lower than the threshold temperatures, or when there are temperatures within or beyond
a temperature interval. The parts with temperature exceptions will be marked with different
colors. The function can be used in various thermal analysis scenarios, such as detecting the ill
livestock whose body temperature is abnormal during quarantine inspection.
Enter the Picture and Video Management page first according to one of the following methods.
● On the home page of the Mobile Client, tap Picture & Video.
● In the lower-left corner of the Live View page, tap the thumbnail of the captured picture or
recorded video, tap the larger picture or the video again, and tap Enter Picture & Video.
Note
○ After tapping the larger picture, you can tap to set the alarm temperature according to
the following steps.
○ You can tap
to return to the Live View page quickly.
On the Picture and Video Management page, tap a picture and then tap → to set the
alarm temperature. After setting the alarm temperature, you can tap Save to overwrite the
original picture or save the picture as a new picture.
Temp Alarm
If the temperature of apart in the picture is higher than the configured one, the part will be
displayed in red.
The settings can be used in scenarios such as determining if components running exceptions
exist in power station.