User Manual

HIKMICRO Smartphone Module User Manual
3
Chapter 3 Log in to Device
After that logging in to the device, you can perform further operations such as live view and
temperature measurement on the software.
3.1 Log in to Smartphone Module
Smartphone Module is an IR (Infrared) thermal imaging accessory with Type-C plug. After logging
in to the device, you can perform operations such as temperature measurement.
When you insert the Smartphone Module into the Type-C port of your phone, the device will be
automatically logged in and then you will enter the live view.
Note
In live view page, you can tap to return to the home page. If the Smartphone Module has not
been unplugged after you return to the home page, you can tap Smartphone Module to enter the
live view again.
3.2 Device Settings
On the Device Settings page, you can view device information, set the unit, enable alarm
notification, and restore the device.
After logging in to a device, you can tap
to enter the Device Settings page.
Unit
You can select Celsius, Kelvin, and Fahrenheit as temperature unit.
High Temp/Temp Alarm
When High Temp/Temp Alarm is switched on, Alarm Threshold will be enabled. You can set a
threshold value as needed. When the device detects a temperature which is equal to or higher
than the set value in live view, a high-temperature alarm icon will appear at the top of the
screen. Your phone will vibrate and meanwhile its pre-set prompt tone will be played.
Note
● This function is supported by both Temperature Screening Smartphone Module and
Thermographic Smartphone Module.
● For Temperature Screening Smartphone Module, the valid threshold range is 30 to 40
℃
.
The default value is 37.5
℃
.
● For Thermographic Smartphone Module, the valid threshold range is 20 to 500
℃
. The
default value is 55
℃
.