User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Download the Mobile Client
- Chapter 3 Log in to Device
- Chapter 4 Live View
- Chapter 5 Picture and Video Management
- 5.1 View Pictures
- 5.2 Switch Thermal/Optical View for Captured Picture
- 5.3 Set Thermometry Parameters for Captured Picture
- 5.4 Measure Spot's Temperature for Captured Picture
- 5.5 Measure Frame's Temperature for Captured Picture
- 5.6 Set Alarm Temperature for Captured Picture
- 5.7 Set Palettes for Captured Picture
- 5.8 Generate Report
- 5.9 View Videos
- 5.10 Share Pictures and Videos
- 5.11 Delete Pictures and Videos
- Chapter 6 Local Settings
- A. Common Material Emissivity Reference
HIKMICRO Smartphone Module User Manual
4
● For Thermographic Smartphone Module, if you have set more than one frames on the live
video image, and if one of these frames has first detected the abnormal temperature and
triggered the high-temperature alarm, the other frame(s) will not trigger the
high-temperature alarm.
Skin-Surface Measurement (Temperature Screening Smartphone Module)
When Skin-Surface Measurement is enabled, the skin-surface temperature will be
automatically adjusted to the core body temperature.
Factory Reset
Restore the device to its factory settings.
Upgrade Device
When a new version of device firmware is available, you can tap New Version to upgrade the
device firmware.