Installation Guide

Page 11
Installation guide
INSTALL_GATEWAY-LITE-V7
2019/04 Edition
4.4 Configuration Serial Interface
Type of interface
RS232
Baud rate
115200bauds
Data bits
8
Parity
No
Stop bit
1
Flow control
No
The RS 232 port is used for the configuration of the GATEWAY-LITE, it can also be used in
operation (notification, settings, etc.), refer to the documentation of the serial communication
interface provided or contact the HIKOB support.
HIKOB has in its catalog a USB-RS232
cable with 2 connectors allowing both to
power the GATEWAY-LITE and configure
it from a computer or tablet.