User manual

Day/Night High-definition Dome Camera·User Manual
9
9
Figure 2-4 Securing Back box
6. Route the cables through the hole in the center of the drill
template.
7. Align the camera with the back box.
8. Tighten the set screws to secure the camera with the back box.
9. Connect the video output connector to the monitor. Connect
the power connector to the power supply.
10. Adjust the image and focus. Please refer to the section 2.3 for
more detailed information.
11. Install the inner black liner back to the camera.
12. Tighten the screws to secure the lower dome with the back
box.