User Manual of Mini Camera UD.
Day/Night High-definition Box Camera· User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to the following cameras: DS-2CC5197P(N)-DG1 DS-2CC51A7P(N)-DG1 DS-2CC5192P(N)-DG1 DS-2CC51A2P(N)-DG1 DS-2CC502P(N)-DG1 DS-2CC502P(N)-DG2 This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice.
Day/Night High-definition Box Camera· User Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Day/Night High-definition Box Camera· User Manual 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
Day/Night High-definition Box Camera· User Manual Safety Warnings and Cautions Please pay attention to the following warnings and cautions: Hazardous Voltage may be present: Special measures and precautions must be taken when using this device. Some potentials (voltages) on the device may present a hazard to the user. This device should only be used by Employees from our company with knowledge and training in working with these types of devices that contain live circuits.
Day/Night High-definition Box Camera· User Manual attached is also connected to properly wired grounded receptacles and are approved medical devices. Power Connect and Disconnect: The AC power supply cord is the main disconnect device to mains (AC power).The socket outlet shall be installed near the equipment and shall be readily accessible. Installation and Maintenance: Do not connect/disconnect any cables to or perform installation/maintenance on this device during an electrical storm.
Day/Night High-definition Box Camera· User Manual Perchlorate Material: Special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is required by California Code of Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials. This device includes a battery which contains perchlorate material. Taiwan battery recycling: Please recycle batteries.
Day/Night High-definition Box Camera· User Manual Lead Content: Please recycle this device in a responsible manner. Refer to local environmental regulations for proper recycling; do not dispose of device in unsorted municipal waste.
Day/Night High-definition Box Camera· User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Day/Night High-definition Box Camera· User Manual responsibility for problems caused by unauthorized repair or maintenance.) To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture. This installation should be made by a qualified service person and should conform to all local codes. Please install blackouts equipment into the power supply circuit for convenient supply interruption.
Day/Night High-definition Box Camera· User Manual The sensor may be burned out by a laser beam, so when any laser equipment is being used, make sure that the surface of the sensor will not be exposed to the laser beam. Do not place the camera in extremely hot or cold temperatures (the operating temperature should be between -10°C ~ 60° C, dusty or damp locations, and do not expose it to high electromagnetic radiation.
Day/Night High-definition Box Camera· User Manual 11
Day/Night High-definition Box Camera· User Manual Table of Contents 1 Introduction ......................................................................14 1.1 Product Features .................................................... 14 1.2 Function Summary ................................................. 16 1.3 Hardware Overview ................................................ 18 2 Menu Description ..............................................................23 2.1 MAIN MENU ................................
Day/Night High-definition Box Camera· User Manual 2.4.12 Pixel Correction ........................................... 38 2.5 System .................................................................. 40 2.5.1 Camera ID Settings ....................................... 40 2.5.2 System Information ...................................... 42 2.5.3 Camera Reset ............................................... 42 2.6 Language ............................................................... 42 2.7 Exit ................
Day/Night High-definition Box Camera· User Manual 1 Introduction 1.1 Product Features This camera adopts high performance CCD and advanced print circuit board. It is possessed of high resolution, low distortion, low noise features and etc. It is suitable for both surveillance systems and image processing systems. Key features for DS-2CC5197P-DG1 and DS-2CC51A7P-DG1: Adopt high performance SONY CCD, supply ing users with high definition image.
Day/Night High-definition Box Camera· User Manual Adopt high performance SONY CCD, supply ing w ith high definition image. Designed for low illumination situations, and day/night auto-switch function is supported. Support auto gain control, providing adaptive brightness to changing environments. Support BLC (Back Light Compensation) function. Auto-WB (white balance) promotes the original color of the images.
Day/Night High-definition Box Camera· User Manual 1.2 Function Summary Motion Detection: In the user-defined motion detection surveillance area, the moving object can be detected to trigger the alarms. The sensitive level can be customized specifically. Privacy Mask: This function allows you to block or mask certain areas of a scene to prevent the personal privacy from being recorded or viewed.
Day/Night High-definition Box Camera· User Manual S/N ratio: The ratio of Signal voltage and Noise voltage. The ratio is larger, the effect of noises is less, and the image is clearer. OSD (On-Screen Display): The on-screen display is a text superimposed on the live view screen to display information and menu. Synchronous System: Synchronization of the camera usually contains power synchronization and internal synchronization.
Day/Night High-definition Box Camera· User Manual 1.
Day/Night High-definition Box Camera· User Manual Appearance of DS-2CC5192P-DG1 and DS-2CC51A2P-DG1: Lens Bracket Figure 1-5 Front View Video Line and power ling adapter Figure 1-6 Rear Panel 19
Day/Night High-definition Box Camera· User Manual Appearance of DS-2CC502P-DG1: Lens Bracket Figure 1-7 Front View Video Line and power ling adapter Figure 1-8 Rear View 20
Day/Night High-definition Box Camera· User Manual Appearance of DS-2CC502P-DG2: Lens Bracket Figure 1-9 Front View Video Line and power ling adapter Figure 1-10 Rear View The video output interface can connect to the interface of the video controller, and the controller connects to the DVR or display devices. You can use the controller to control the mini camera.
Day/Night High-definition Box Camera· User Manual Figure 1-11 Wiring for connection of the controller 22
Day/Night High-definition Box Camera· User Manual Note: Only the DS-2CC5197P-DG1 and DS-2CC51A7P-DG1support the video controller. Coaxial controlling is supported, and the coaxial controller is not the standard configuration. 2 Menu Description 2.1 MAIN MENU Steps: 1. Press the menu button on the video controller of the camera to access the main menu and the submenu. 2. Switch the menu button of the controller to different direction to select the menu.
Day/Night High-definition Box Camera· User Manual 2.2 Scene Purpose: This menu helps you to get the appropriate image of camera without adjusting the complicated parameters in the EXPOSURE and FUNCTION menu. There are 2 scenes selectable: INDOOR BACKLIGHT and OUTDOOR BACKLIGHT. You can select the two predefined scenes or you can alsocustomize the image parameters to adapt to different scenarios. Steps: 1. Move the cursor to SCENE, press the menu button on the controller to enter the submenu. 2.
Day/Night High-definition Box Camera· User Manual LENS SETUP VALUE ---|--- 007 CONTRAST ---|--- 007 RETUREN 2.3.2 BLC (Backlight Compensation) and WDR (Wide Dynamic Range) Purpose: You can set the backlight compensation and high light compensation functions of the camera on BACKLIGHT settings submenu. BLC (Backlight Compensation) If there’s a strong backlight, the object in the foreground appears silhouetted or dark. BLC can correct the exposure of the subject.
Day/Night High-definition Box Camera· User Manual BLC/WDR MODE BLC ▽ eeeeeeeeeeeeeeeeeeeeeeeeeeeeeee AREA SIZE CUSTOMIZED ENTER POSITION VALUE 2. ▽ ENTER ------| 015 回 Move the cursor to select the value and the area for the BLC and you can choose to customize the BLC area. 3. When the cursor moved to SIZE parameters press the menu button of the controller the cursor change to , and switch the button up and down to set the BLC zone. 4. Press the button again to confirm the settings. 5.
Day/Night High-definition Box Camera· User Manual BLC/WDR ▽ MODE WDR VALUE ---|--- 007 CONTRAST ---|--- 007 WD ADJUST OFF ▽ H-COLOR ADJ OFF ▽ RETUREN The VALUE of the WDR ranges from 0 to 15.The contrast of the WDR ranges from 0 to 15. The WD ADJUST should be on; if the camera is used in the relatively dark scene and the WDR effect is not so good.
Day/Night High-definition Box Camera· User Manual If you choose the auto day/night switch, you enter the following interface: DAY/NIGHT SETUP MODE AUTO D->N LEVEL ▽ (L)--|--(H) D->N DELAY ▽ 3S N->D LEVEL (L)--|--(H) N->D DELAY 3S ▽ RETURN The D->N LEVEL refers to the threshold of the automatic changing of the DAY and NIGHT parameters. D->N DELAY means the delay time of the changing of DAY and NIGHT parameters. 2.3.4 Shutter 1. Select EXPOSURE> SHUTTER 2.
Day/Night High-definition Box Camera· User Manual 2.3.5 AGC You can choose the OFF, LOW, MEDIUM, and HIGH mode. 2.3.6 Anti-Flicker Purpose: The image of the camera may flicker in the 60Hz light when in PAL standard and in 50Hz in NTSC standard. You can enable this function to avoid the problem. Steps: 1. Move the cursor to FLICKERLESS and press the button. 2. Switch the button to choose ON or OFF. 2.
Day/Night High-definition Box Camera· User Manual 2.4.1 White Balance This feature processes the viewed image to retain co lor balance over a color temperature range and remove the unrealistic colorcasts. Steps: 1. On the FUNC submenu, move the cursor to WHITE BALANCE, and press the menu button to set the white balance mode. 2. Move the cursor to select the WHITE BALANCE mode to ATW1, ATW2, ATC or MANUAL. ATW1: The Auto Tracking White Balance.
Day/Night High-definition Box Camera· User Manual ATC: Adjust the white balance when the monitoring scene is w ith stable color temperature. When you select AUTO mode and press the Enter, the system will start white balance processing for the current scene. MANUAL: Set the white balance by adjusting the R-Gain and B-Gain value.
Day/Night High-definition Box Camera· User Manual 2.4.2 3D-NR (Noise Reduction) The 3D-NR (Noise Reduction) is used to reduce the no ises in the video signal. You can set the mode to ON or OFF. When the NR is enabled, level 0~7 is selectable. 2.4.3 Sharpness The SHARPNESS describes the clarity of details in the image. The value ranges from 0 to 15. 2.4.4 Y Gain The brightness (Y Gain) of the image can be adjusted from 0 to 7. 2.4.5 C Gain The hue (C Gain) of the color can be adjusted from 0 to 7. 2.4.
Day/Night High-definition Box Camera· User Manual 2.4.7 Mirror When the MIRROR function is enabled, the image can be mirrored horizontally, vertically or by center. 2.4.8 Anti-shake The Anti-shake function is used to maintain image stabilization in monitoring scene w ith slight vibration. Move the cursor to ANTI-SHAKE, and press the menu button to set enter the anti-shake settings menu. See the mode to ON or OFF.
Day/Night High-definition Box Camera· User Manual 2. Select the mode to ON. 3. Set the type to TYPE1, TYPE2 or TYPE3. 4. Configure motion detection area. Configuring area for type1: (1) Move the cursor to AREA SET, and press the menu button to enter the area settings menu.
Day/Night High-definition Box Camera· User Manual 1~ Area 4) to be configured. (3) Set the motion detection for the selected area to ON. (4) Set the area size and position by defining the top/bottom and left/right values. The configured area can be viewed on the screen. (5) Press RETURN to back to the MOTION DET SETUP menu.
Day/Night High-definition Box Camera· User Manual 2.4.10 Privacy Mask Purpose: You can set privacy masks on the live view screen to cover certain areas where don’t need to be viewed or recorded. The size, color and transparency of the areas are adjustable. Steps: 1. Move the cursor to PRIVACY MASK and press the menu button to enter the privacy mask settings menu. 2. Select the mode to ON. 3. Select the privacy mask area (Area 1~Area 12) to be configured. 4.
Day/Night High-definition Box Camera· User Manual Move the cursor to the four points and press the menu button left/right to set the top/bottom/left/right value. The configured area can be viewed on the screen. 6. Press the menu button left/right to select the co lor for the privacy mask. Up to 8 colors are selectable, and by default the color is set to white. 7. Set MOSAIC to ON if you want to set the mask as mosaic. 8. Repeat steps 3-6 to configure other privacy mask areas. 9.
Day/Night High-definition Box Camera· User Manual X8 or X16. 3. When the digital zoom ratio has been selected, you can set the position of the image area to be zoomed. Move the cursor to POSITION and press the menu button up/down to move the image area. 4. Press RETURN to back to the previous menu. 2.4.12 Pixel Correction Purpose: The CCD sensor of the lens may appear defective pixels. You can trigger the pixel correction function to correct and compensate the defective pixels. Steps: 1.
Day/Night High-definition Box Camera· User Manual 2. Set the value of sensitivity to 0~7. 3. Move the cursor to DBC to set its value to 0~7. 4. The DBC function enables the camera to dynamically detect and correct the defective pixels on the image. The lower value represents higher pixel correcting level, yet the image definition w ill be affected. 5. Move the cursor to START and press the menu button to start pixel correction. 6. After the correction is finished, press RETURN to back to the previous menu.
Day/Night High-definition Box Camera· User Manual 2.5 System On the main menu, move the cursor to SYSTEM and press the menu button to access the SYSTEM submenu: 2.5.1 Camera ID Settings Purpose: On Camera ID submenu, you can customize the camera ID. You can also adjust the camera ID position on the live view screen. Steps: Editing the camera ID 1. Move the cursor to CAMERA ID and set to ON. Press the menu button to enter the camera ID settings menu.
Day/Night High-definition Box Camera· User Manual 2. Move the menu button up/down/left/right to select the character shown on the screen, and then press the menu button to enter the character you selected. Repeat the same step to edit other characters. Note: The characters include letters, numbers and symbols. 3. Set the position of camera ID. (1) Move the cursor to POS, and press the menu button to enter the camera ID position settings menu.
Day/Night High-definition Box Camera· User Manual 2. Press the menu button to position the cursor on the character of the current camera ID which needs to modify. 3. Move the cursor to the character list and select one to replace it. Clearing the camera ID Steps: 1. Position the cursor on CLR. 2. Press the menu button to clear the characters. 2.5.2 System Information On the System submenu, move the cursor to SYSTEM INFO and press the menu button to enter the system information menu.
Day/Night High-definition Box Camera· User Manual 2.7 Exit Steps: 1. On the main menu, move the cursor to EXIT and press the menu button to enter the Exit menu. 2. Move the cursor to SAVE ALL to save all the settings; or select CANCEL to exit w ithout saving. 3. Move the cursor to RETURN to exit the menu.