User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
Chapter 3 Basic Operaon
You can perform the basic operaons once the recorder is connected to an IP camera.
Note
All the operaons from Chapter 3 to Chapter 11 is done via web browser.
3.1 Congure Date & Time
Congure me zone and me synchronizaon mode.
Steps
1. Go to Conguraon → System → System Sengs → Time Sengs .
2. Select Time Zone according to the recorder
locaon.
3. Select me synchronizaon mode as NTP or Manual Time Sync.
-
If an NTP server is available, select NTP and enter NTP server informaon to synchronize NTP
server me to your recorder.
-
Select Manual Time Sync. and set
me to customize the recorder me.
-
Select Manual Time Sync. and check Sync. with computer me to synchronize the computer
me to your recorder.
4. Click Save.
3.2 IP Camera Adding
The secon is only available for the recorder that supports network camera.
3.2.1
Acvate IP Camera
Before adding an IP camera, acvate it by seng a password for it.
Steps
1. Go to
Conguraon → System → Camera Management .
2. Select an inacvated IP camera.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system,
reseng the
password monthly or weekly can
beer protect your product.
1. Click Acvaon.
Mobile Video Recorder User Manual
5