Quick Start Guide

Mobile Digital Video Recorder (-SD) Quick Start Guide
19
Figure 4-3 Platform Settings
Step 2 Check Enable.
Step 3 Select Platform Access Mode as Ehome Platform.
Step 4 Configure the following parameters.
 Server Address Type: IP Address and Domain Name are selectable.
 Server Address: Enter the static IP address of iVMS server.
 Server Port: The default value for mobile surveillance platform is 7660.
 Device ID: The ID of the device registered on the eHome platform. If you leave it empty, device
logs in to the platform with serial No.
Step 5 Click Save and reboot the device to activate the new settings.
4.4 IP Camera Management
The chapter is only available for device supporting IP camera feature.
4.4.1 Activate IP Camera
Before adding an IP camera, activate it by setting a password for it.
Step 1 Go to Configuration > System > Camera Management.
Step 2 Select an inactivated IP camera.
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.