Mobile Video Recorder User Manual
Mobile Video Recorder User Manual Legal Information User Manual ©2018 Hangzhou Hikvision Digital Technology Co., Ltd. About this Manual This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision Digital Technology Co., Ltd. ("Hikvision") reserves all rights to this manual. This manual cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
Mobile Video Recorder User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Mobile Video Recorder User Manual equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
Mobile Video Recorder User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Mobile Video Recorder User Manual Contents Chapter 1 Product Introduction .................................................................................................. 1 1.1 Introduction ........................................................................................................................... 1 1.2 Key Features ........................................................................................................................... 1 Chapter 2 Start Up Device ........................
Mobile Video Recorder User Manual 4.1.1 Dial .............................................................................................................................. 11 4.1.2 Connect Wi-Fi .............................................................................................................. 11 4.1.3 Set Local Network ....................................................................................................... 12 4.1.4 Port Configuration ...............................................
Mobile Video Recorder User Manual 6.2 Delayed Shutdown ............................................................................................................... 20 6.3 Configure Satellite Positioning ............................................................................................. 20 6.4 Configure G-Sensor Alarm ................................................................................................... 21 6.5 Configure Sensor-in .....................................................
Mobile Video Recorder User Manual 9.8.1 Trigger Recording ........................................................................................................ 30 9.8.2 Trigger Audible Warning ............................................................................................. 30 9.8.3 Full Screen Monitoring ................................................................................................ 31 9.8.4 Trigger Alarm Output ...............................................................
Mobile Video Recorder User Manual 12.3 Playback ............................................................................................................................. 39 12.4 Back up ..............................................................................................................................
Mobile Video Recorder User Manual Chapter 1 Product Introduction Introduce the recorder and its key features. 1.1 Introduction Adopting embedded Linux operating system, mobile video recorder (hereinafter referred to as the recorder) provides powerful monitoring functions. It can both work alone as a recorder and cooperate with other devices to build a comprehensive surveillance system. The recorder is widely applied to the surveillance projects of public transportation, school bus, etc. 1.
Mobile Video Recorder User Manual Chapter 2 Start Up Device 2.1 Activate the Device You can activate the recorder via the SADP software, the Web, the client software or the local menu. Caution • If you want to activate the device via the SADP software, the Web or the iVMS-4200 client software, make sure that the device and your computer are in the same network segment. • • If you want to activate the recorder via the local menu, you must connect the device to an external monitor. 2.1.
Mobile Video Recorder User Manual Activate via SADP SADP software is used for detecting the online device, activating the device, and resetting the password. Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts. Follow the steps to activate the camera. Before You Start • Ensure your computer and the recorder are in the same network segment. • Install the SADP software in your computer. Steps 1. Run the SADP software. 2.
Mobile Video Recorder User Manual And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 5. Enter the same password in Password and Confirm Password. 6. Click OK. Activate via Web Browser You can activate the device via a web browser. Before You Start Ensure your computer and the recorder are in the same network segment. Steps 1.
Mobile Video Recorder User Manual Chapter 3 Basic Operation You can perform the basic operations once the recorder is connected to an IP camera. Note All the operations from Chapter 3 to Chapter 11 is done via web browser. 3.1 Configure Date & Time Configure time zone and time synchronization mode. Steps 1. Go to Configuration → System → System Settings → Time Settings . 2. Select Time Zone according to the recorder location. 3. Select time synchronization mode as NTP or Manual Time Sync.
Mobile Video Recorder User Manual 4. Enter the same password in New Password and Confirm. 5. Click OK. 3.2.2 Add IP Camera You can add the activated IP cameras. Ensure the device and IP cameras are in the same network segment. Before You Start The record and the camera to add must be in the same network segment. Steps 1. Go to Configuration → System → Camera Management . 2. Optional: If the recorder and the camera are in different network segment, modify IP camera address.
Mobile Video Recorder User Manual 3.3 Recording To record the videos for connected cameras, you need to install a storage media and format it, and configure the recording schedule. 3.3.1 Format Storage Media A newly installed storage media must be initialized before it can be used. Before You Start Install a storage media. Steps 1. Go to Configuration → Storage → Storage Management . 2. Check the storage media and click Format. Result After format, the storage media status should be Normal. 3.3.
Mobile Video Recorder User Manual 3.3.3 Configure Event Triggered Recording Trigger recording when an event is triggered. Before You Start • Install and format the storage media. • Configure event parameters. For details, refer to Events and Alarms . Steps 1. Go to Configuration → Storage → Schedule Settings . 2. Select Channel No. 3. Check Enable. 4. Select recording type as Motion | Alarm, Alarm, Motion, or Motion & Alarm.
Mobile Video Recorder User Manual Before You Start • Connect a mobile fireproof storage box to your recorder. • Configure the recording schedule. Steps 1. Go to Configuration → Vehicle → Storage For Calamity . 2. Check Enable. 3. Check Redundant Channel. The recorder will save the videos of the selected channels in both HDD and mobile fireproof storage box. 4. Click Save. 3.4 Playback Play videos saved in storage medias. Steps 1. Go to Playback. 2. Click to select a channel in channel list. 3.
Mobile Video Recorder User Manual 2. 3. 4. 5. 6. Click . Search search conditions. Click Search. Check videos to download and click Download. For the video saving path, refer to Configuration → Local → Save Downloaded Files to . 3.5.2 Back Up Clipped Videos Clip videos and save them to a local path. Steps 1. Go to Playback. 2. Start playback. 3. Click to start clipping. 4. Click to stop clipping. 5. For clipped video saving path, refer to Configuration → Local → Save clips to . 3.5.
Mobile Video Recorder User Manual Chapter 4 Network 4.1 Network Connection 4.1.1 Dial Set dialing parameters. Before You Start Install 3G/4G SIM card and connect 3G/4G antenna to your recorder. Steps 1. Go to Configuration → Network → Basic Settings → 3G/4G . 2. Check Enable. 3. Click Dial Parameters. 4. Select Network Mode. - Automatic: The recorder will automatically switch to the strongest network. - Auto-Search and Auto-Switch: Network priortiy: 4G > 3G > 2G.
Mobile Video Recorder User Manual 4) Enter SSID. 5) Select Network Mode as Managed. 6) Select Security Mode and enter Wi-Fi key. 4. Click Save. 5. Optional: Go to Configuration → Network → Advanced Settings → Wi-Fi → Wi-Fi Status to view Wi-Fi status. 4.1.3 Set Local Network Configure local network parameters. Steps 1. Go to Configuration → Network → Basic Settings → TCP/IP . 2. Select LAN port. - Debug Interface: Used to debug the recorder. - Rear interface: Used to connect network cameras. 3.
Mobile Video Recorder User Manual Steps 1. Go to Configuration → Network → Basic Settings → DDNS . 2. Select DDNS Type. 3. Enter server information. 4. Click Save. What to do next Open the web browser and enter the recoder domain name to visit it. 4.2 Platform Connection 4.2.1 Connect to Mobile Surveillance Platform The device can be remotely accessed via mobile surveillance platform. Before You Start Create the device ID on mobile surveillance platform. Steps 1.
Mobile Video Recorder User Manual Figure 4-1 iOS Figure 4-2 Android 4.2.2 Connect to Guarding Vision The device can be remotely accessed via guarding vision platform. Before You Start • Connect your recorder to internet. • Configure IP address, sub-netmask, gateway, and DNS server of LAN port. Steps 1. Go to Configuration → Network → Advanced Settings → Platform Access . 2. Check Enable. 3. Select Platform Access Mode as Guarding Vision. Caution Valid security code range [6-12].
Mobile Video Recorder User Manual 4.3 Network Sharing 4.3.1 Set Wi-Fi AP The recorder can work as a wireless router. Othe devices can access network via the recorder. Steps Caution You can only turn on one function between Wi-Fi AP and Wi-Fi. Turning on one of them will turn off the other. 1. Go to Configuration → Network → Advanced Settings → Wi-Fi AP . 2. Check Enable Wi-Fi AP, Enable AP Broadcast, and Enable WLAN HotSpot. 3. Configure hotspot parameters. 1) Enter SSID (hotspot name).
Mobile Video Recorder User Manual Chapter 5 Live View and Configuration 5.1 Live View 5.1.1 Start/Stop Live View Start/stop the live view of cameras. Steps 1. Go to Live View. 2. Click to select window division and click to select a window to display the live view image. 3. Double click a camera in the camera list to display its live image in selected window. Or click to start the live view of all cameras. 4. Double click the camera again to stop its live view.
Mobile Video Recorder User Manual 4. View captured pictures. - Enter the path popped up in the lower right corner. - Go to Configuration → Local → Picture and Clip Settings for the saving path of captured pictures. 5.1.5 Manual Recording Record videos in live view and save them to your computer. Steps 1. Go to Live View. 2. Start live view of a camera. 3. Click to start recording. 4. Click to stop recording. 5. Go to the set saving path to view recorded videos.
Mobile Video Recorder User Manual Start the live view and click to display the live view image in full screen. Press Esc to exit from the full-screen mode. 5.1.9 Channel-Zero Channel-zero, known as virtual channel, can show the videos from all channels of the recorder, reducing the bandwidth while simultaneously previewing from multi-channel. Steps 1. Go to Configuration → Video/Audio → Channel-zero . 2. Check Enable Channel-zero Encoding. 3. Select Max. Bitrate and Max. Frame Rate. 4. Click Save. 5.
Mobile Video Recorder User Manual Icon Description Icon Description Direction buttons. Auto-scan button. Zoom -. Zoom +. Focus +. Focus -. Iris +. Iris -. Turn on /off light. Start/stop wiper. 5.3 Local Configuration Local configuration refers to the parameters of live view image, videos and captured pictures. Stream Type Select the default live live stream type. Main stream and sub-stream are selectable. Play Performance Shortest Delay: The recorder ensures real-time capacity in priority.
Mobile Video Recorder User Manual Chapter 6 Mobile Device Features 6.1 Timed Shutdown The recorder will automatically start up/shut down according the schedule. Before You Start Wire power cord. For details, refer to quick start guide. Steps 1. Go to Configuration → Vehicle → Start . 2. Select Auto Work Type as Auto Working. 3. Set the shutdown schedule. For detailed steps, refer to Configure Arming Schedule . 4. Optional: Check Low Power Protect and select Low Power Protect Limit.
Mobile Video Recorder User Manual 3. 4. 5. 6. 7. 8. Built-in Obtain data from the satellite positioning module built in the recorder. Intelligent Display Terminal Obtain data from display terminal. Select Locating Module. Optional: Check Enable of Satellite Timing to synchronize recorder time with satellite time. Configure speed limit. 1) Select Speed Units. 2) Enter Speed Limit of Alarm. If vehicle speed exceeds the set value, the recorder will alarm.
Mobile Video Recorder User Manual 6.5 Configure Sensor-in Sensor-in detects and records the vehicle's driving information, including pedal braking, turning left/right, reversing, etc. Before You Start Connect the recorder sensor-in interface and vehicle corresponding interface. For details, refer to quick user guide. Steps 1. Go to Configuration → Vehicle → Sensor-In . 2. Select Trigger Level and Pop Channel according to actual situation.
Mobile Video Recorder User Manual Chapter 7 Camera Management 7.1 Configure Encoding Parameters Configure encoding parameters to adjsut live view image and video parameters. Go to Configuration → Video/Audio → Video . In good network situation, you can set high resolution and bitrate to improve image quality. In bad network situation, you can set low resolution, bitrate, and frame rate to get fluent image. 7.2 Image Settings 7.2.
Mobile Video Recorder User Manual 7.3 Set OSD Parameters Configure the camera name, OSD (On Screen Display) settings, etc. Steps 1. Go to Configuration → Image → OSD Settings . 2. Select Channel No. 3. Enter Camera Name, select Time Format and Date Format. 4. Optional: Check Display Name, Dispaly Date, and Display Week as your desire. 5. Set OSD Display Mode. 6. Optional: To display text on OSD, check one text overlay and enter text. 7. Drag the red frame on live view window to adjust OSD position. 8.
Mobile Video Recorder User Manual Chapter 8 Driving Behavior Configuration The function analyzing driver's behavior, including smoking, fatigue driving, talking on phone, etc. The recorder will trigger warning when these behaviors are detected. 8.1 Smart Device Driving Behavior Configuration Only the recorder with A in model name supports driving behavior detection function. One recorder supports analyzing one channel at a time. 8.1.
Mobile Video Recorder User Manual Stop Detections when Driving in Low-Speed The feature is valid when GPS positioning succeeded. When the vehicle speed is lower than the set value, all the driving behavior analyses will stop. Voice Alarm When it is checked, device will send out voice alarm when a checked behavior is detected. Note One recorder supports analyze driving behavior for one channel at a time. Enabling the driving behavior analysis will disable driving behavior analysis of other channels. 4.
Mobile Video Recorder User Manual 3. Enter smart terminal information. 4. Click Save. 8.2.2 Set Arming In the set arming period, the recorder will trigger specified linkage method when the concerned driving behavior is detected. Steps 1. Go to Configuration → Event → Basic Event → Driving Behaviors . 2. Select Channel No. and Driving Behaviors. The channel should be network camera that connected to both the added smart terminal and the recorder. 3. Check Enable. 4. Configure arming schedule.
Mobile Video Recorder User Manual Chapter 9 Events and Alarms 9.1 Configure Motion Detection Alarm When motion detection alarm is configured, once a motion event is detected, the device starts to record and multiple linkage actions will be triggered. Steps 1. Go to Configuration → Event → Basic Event → Motion Detection . 2. Select Channel No. 3. Draw detection area. 1) Click Draw Area. 2) In preview area, drag to draw the detection area. 3) Click Stop Drawing. 4. Configure arming schedule.
Mobile Video Recorder User Manual 4. 5. 6. 7. 3) Click Stop Drawing. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule . Configure linkage method. For detailed steps, refer to Configure Linkage Actions . Set Sensitivity. Click Save. 9.4 Configure Alarm Input Configure the settings for alarm input, including trigger level, arming schedule and alarm linkage actions, etc. Before You Start Connect an alarm device to your recorder. Steps 1.
Mobile Video Recorder User Manual 9.6 Configure Exception Alarm Configure alarms which are triggered by exceptions to take necessary actions in time. Steps 1. Go to Configuration → Event → Basic Event → Exception . 2. Select Exception Type. 3. Configure linkage method. For detailed steps, refer to Configure Linkage Actions . 4. Click Save. 9.7 Configure Arming Schedule Steps 1. Drag in time line to draw a arming period. 2. Adjust the set arming period. - Click a period and adjust its length.
Mobile Video Recorder User Manual 9.8.3 Full Screen Monitoring To display image from the arming channel in full screen, check Full Screen Monitoring. 9.8.4 Trigger Alarm Output To trigger the alarm of alarm output device connected to the recorder, check Trigger Alarm Output.
Mobile Video Recorder User Manual Chapter 10 Security 10.1 User Account Management You can add and delete users, and modify the password and permission of users. Steps 1. Go to Configuration → System → User Management . 2. Click Add. 3. Edit new user parameters and click OK to create the user.
Mobile Video Recorder User Manual 10.3 Configure Whitelist Only the trusted IP addresses on the white list can access the device via the network. Steps 1. Go to Configuration → System → Security → White List . 2. CheckEnable White List. 3. Click Add and enter desired IP Address. - Select an IP address and click Modify to edit the IP address. - Select an IP address and click Delete to delete the IP address. 4. Click Save. 10.4 SSH Settings SSH is disabled by default for security reasons.
Mobile Video Recorder User Manual Chapter 11 Maintenance 11.1 View System Information You can view your recorder system information and edit recorder name and record number. Go to Configuration → System → System Settings → Basic Information to view the recorder information. You can edit Device Nmae and Device No. 11.2 Search Log File You can view and export logs saved in the recorder storage media. Go to Configuration → System → Maintenance → Log to search or export logs. 11.
Mobile Video Recorder User Manual Go to Configuration → System → Maintenance → Upgrade & Maintenance . Restore Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings. Default Restore all parameters to the factory default settings. 11.6 Export Configuration File The configuration files of the recorder can be exported to your computer for backup. Steps 1.
Mobile Video Recorder User Manual 11.9 Configure Local Output You can configure local output and resolution remotely. Go to Configuration → System → System Settings → Menu Output to configure Menu Output and Resolution. Note The function varies with model. 11.10 Configure RS-232 To debug recorder via serial port or connect serial device, you can configure RS-232 parameters. Before You Start Connect a serial device to your recorder RS-232 interface. Steps 1.
Mobile Video Recorder User Manual Chapter 12 Local Menu Operation Connect a display and a mouse to recorder, you can operate the recorder locally. 12.1 IP Camera Adding The section is only available for the recorder that supports network camera. 12.1.1 Activate IP Camera Before adding an IP camera, activate it by setting a password for it. Before You Start Connect the IP camera to IP camera interface in the recorder rear panel. Steps 1. Go to Menu → Other Settings → IPC Settings . 2.
Mobile Video Recorder User Manual 4. Add the IP camera. 1) Click ManuAdd. 2) Select IP channel No. for the IP camera. 3) Edit the required information. 4) Click OK. 12.1.3 Edit IP Camera You can edit or delete added IP cameras. Steps 1. Go to Menu → Other Settings → IPC Settings . 2. Optional: You can change the parameters of the added IP cameras. 1) Select an IP camera. 2) Edit the parameters. If you change the IP address, you will connect to another IP camera. 3) Click OK. 3.
Mobile Video Recorder User Manual Steps 1. Go to Menu → Basic Settings → Record . 2. Select the camera to set recording schedule. 3. Click Set of Schedule. 4. Check Enable Schedule. 5. Select the day from the dropdown list for settings. 6. Configure all day schedule or custom schedule. - Check All Day to enable all-day recording, and then select the recording type from the dropdown list. - Uncheck All Day, customize the time period for recording, and select the recording type for each time period.
Mobile Video Recorder User Manual General Normal videos. Event Motion detection, alarm, motion│alarm, motion&alarm videos. 3. Select Camera, Video Type Start Time, and End Time 4. Click Search. 5. Select the videos and click Export. Note The number of USB interface varies with recorder model. If your recorder contains only one USB interface, you can back up videos via remote control or touchscreen.
UD11292B