User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
Chapter 2 Start Up Device
2.1 Acvate the Device
You can acvate the recorder via the SADP soware, the Web, the client soware or the local
menu.
Cauon
• If you want to
acvate the device via the SADP soware, the Web or the iVMS-4200 client
soware, make sure that the device and your computer are in the same network segment.
•
• If you want to acvate the recorder via the local menu, you must connect the device to an
external monitor.
2.1.1 Default Informaon
The default seng of the recorder is as follows:
• Default IP: 192.168.1.64.
• Default user name: admin.
2.1.2
Acvaon
For the rst-me access, you need to acvate the recorder by seng an admin password. No
operaon is allowed before acvaon.
Acvate
via Local Menu
You can acvate the recorder via the local menu when it's connected to an external monitor.
Steps
1. Enter the same password in Password and Conrm Password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
2. Click OK.
Mobile Video Recorder User Manual
2