User Manual

Chapter 3 Basic Operaon
You can perform the basic operaons once the recorder is connected to an IP camera.
Note
All the operaons from Chapter 3 to Chapter 11 is done via web browser.
3.1 Congure Date & Time
Congure me zone and me synchronizaon mode.
Steps
1. Go to Conguraon → System → System Sengs → Time Sengs .
2. Select Time Zone according to the recorder
locaon.
3. Select me synchronizaon mode as NTP or Manual Time Sync.
-
If an NTP server is available, select NTP and enter NTP server informaon to synchronize NTP
server me to your recorder.
-
Select Manual Time Sync. and set
me to customize the recorder me.
-
Select Manual Time Sync. and check Sync. with computer me to synchronize the computer
me to your recorder.
4. Click Save.
3.2 IP Camera Adding
The secon is only available for the recorder that supports network camera.
3.2.1
Acvate IP Camera
Before adding an IP camera, acvate it by seng a password for it.
Steps
1. Go to
Conguraon → System → Camera Management .
2. Select an inacvated IP camera.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system,
reseng the
password monthly or weekly can
beer protect your product.
1. Click Acvaon.
Mobile Video Recorder User Manual
5