User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
4. Enter the same password in New Password and
Conrm.
5. Click OK.
3.2.2 Add IP Camera
You can add the acvated IP cameras. Ensure the device and IP cameras are in the same network
segment.
Before You Start
The record and the camera to add must be in the same network segment.
Steps
1. Go to
Conguraon → System → Camera Management .
2. Oponal: If the recorder and the camera are in dierent network segment, modify IP camera
address.
1) Check the IP camera and click Modify.
2) Enter IP Address and Password.
3) Click OK.
3. Select a camera and click Add.
Note
If the recorder password is the same with the camera's, click Quick Add to add the camera.
4. Enter IP camera informaon.
5. Click OK.
3.2.3 Edit IP Camera
You can visit, delete, and modify the added IP cameras.
Before You Start
If the recorder contains only one network card, you can visit IP camera via the recorder. If the
recorder contains dual network card, you need to enable virtual host
funcon before vising IP
camera via the recorder. Go to Conguraon → Network → Advanced Sengs → Other and check
Enable Virtual Host.
Steps
1. Go to
Conguraon → System → Camera Management .
2. Oponal: Click address of IP camera to visit.
3.
Oponal: Check IP cameras and click Delete to delete added IP cameras.
Mobile Video Recorder User Manual
6