User Manual

3.3 Recording
To record the videos for connected cameras, you need to install a storage media and format it, and
congure the recording schedule.
3.3.1 Format Storage Media
A newly installed storage media must be inialized before it can be used.
Before You Start
Install a storage media.
Steps
1. Go to
Conguraon → Storage → Storage Management .
2. Check the storage media and click Format.
Result
Aer format, the storage media status should be Normal.
3.3.2
Congure Connuous Recording
The recorder is congured with all-day connuous recording by default.
Before You Start
Install and format a storage media.
Steps
1. Go to Conguraon → Storage → Schedule Sengs .
2. Select Channel No.
3. Check Enable.
4. Select recording type as
Connuous.
5. Oponal: Click Advanced to congure Pre-record 和 Post-record.
Pre-record
The
me you set to start recording before the scheduled me or the event. For example, if
an alarm triggers recording at 10:00, and the pre-record me is set as 5 seconds, the device
starts to record at 9:59:55.
Post-record
The me you set to stop recording aer the scheduled me or the event. For example, if an
alarm triggered recording ends at 11:00, and the post-record
me is set as 5 seconds, the
device records unl 11:00:05.
6. Set recording schedule. For detailed steps, refer to Congure Arming Schedule .
7.
Oponal: Click Copy to to copy upper sengs to other channel.
8. Click Save.
Mobile Video Recorder User Manual
7