User Manual

3.3.3 Congure Event Triggered Recording
Trigger recording when an event is triggered.
Before You Start
• Install and format the storage media.
•
Congure event parameters. For details, refer to Events and Alarms .
Steps
1.
Go to Conguraon → Storage → Schedule Sengs .
2. Select Channel No.
3. Check Enable.
4. Select recording type as
Moon | Alarm, Alarm, Moon, or Moon & Alarm.
Moon | Alarm
Trigger recording when either moon detecon or alarm input is detected.
Alarm
Trigger recording when alarm input is detected.
Moon
Trigger recording when either moon detecon detected.
Moon & Alarm
Trigger recording when both
moon detecon and alarm input are detected.
5. Oponal: Click Advanced to congure Pre-record 和 Post-record.
Pre-record
The me you set to start recording before the scheduled me or the event. For example, if
an alarm triggers recording at 10:00, and the pre-record
me is set as 5 seconds, the device
starts to record at 9:59:55.
Post-record
The me you set to stop recording aer the scheduled me or the event. For example, if an
alarm triggered recording ends at 11:00, and the post-record me is set as 5 seconds, the
device records
unl 11:00:05.
6. Set recording schedule. For detailed steps, refer to Congure Arming Schedule .
7. Oponal: Click Copy to to copy upper sengs to other channel.
8. Click Save.
3.3.4 Disaster Storage
The
funcon is only available for recorder supporng mobile reproof storage box. The recorder
will save videos in both HDD and mobile reproof storage box to ensure data seurity.
Mobile Video Recorder User Manual
8