User Manual

Chapter 4 Network
4.1 Network Connecon
4.1.1 Dial
Set dialing parameters.
Before You Start
Install 3G/4G SIM card and connect 3G/4G antenna to your recorder.
Steps
1. Go to
Conguraon → Network → Basic Sengs → 3G/4G .
2. Check Enable.
3. Click Dial Parameters.
4. Select Network Mode.
-
Automac: The recorder will automacally switch to the strongest network.
-
Auto-Search and Auto-Switch: Network priory: 4G > 3G > 2G. The recorder will automacall
connect the network of high priorty.
-
3G: The recorder only connects 3G network.
-
4G: The recorder only connects 4G network.
5.
Oponal: To connect private network, enter Access Number, User Name, Password, and APN.
6. Click Save.
7.
Oponal: Click Wireless Dial-up Status to view dialing status.
4.1.2 Connect Wi-Fi
Congure Wi-Fi parameters.
Steps
1. Go to Conguraon → Network → Basic Sengs → TCP/IP .
2. Set WLAN parameters.
1) Click WLan 1.
2)
Oponal: Check DHCP. Use SADP tool to obtain the recorder IP address when DHCP is
enabled.
3) Enter wireless network IPv4 Address, IPv4 SubnetMask, IPv4 Default Gateway, and DNS
Server .
4) Click Save.
3. Go to
Conguraon → Network → Advanced Sengs → Wi-Fi .
1) Check Enable Wi-Fi.
2) Click Search to search available wireless networks.
3) Select a wireless network in Wireless List.
Mobile Video Recorder User Manual
11