User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
Steps
1. Go to
Conguraon → Network → Basic Sengs → DDNS .
2. Select DDNS Type.
3. Enter server
informaon.
4.
Click Save.
What to do next
Open the web browser and enter the recoder domain name to visit it.
4.2 Plaorm Connecon
4.2.1 Connect to Mobile Surveillance Plaorm
The device can be remotely accessed via mobile surveillance plaorm.
Before You Start
Create the device ID on mobile surveillance plaorm.
Steps
1. Go to
Conguraon → Network → Advanced Sengs → Plaorm Access .
2. Check Enable.
3. Select
Plaorm Access Mode as Ehome Plaorm.
4. Select Server Address Type, and enter Server Address, Server Port, and Device ID.
Server Address
Enter the
stac IP address of mobile surveillance plaorm.
Server Port
The default value is 7660.
Device ID
The ID of the device registered on the mobile surveillance plaorm. If you leave it empty,
device logs in to the plaorm with serial No.
5. Click OK.
Note
• You can download mobile surveillance
plaorm to your computer by vising our ocial
website and going to Home > VMS > Support > Download > iVMS-5200 Mobile Surveillance.
Ocial website: hp://www.hikvision.com/en/ .
• You can download iVMS-5260M to your mobile phone by searching it in app store/google play
or scan QR code below. If you use Android system, install googleplay applicaon on your
mobile phone before scanning the QR code.
Mobile Video Recorder User Manual
13