User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
Figure 4-1 iOS
Figure 4-2 Android
4.2.2 Connect to Guarding Vision
The device can be remotely accessed via guarding vision plaorm.
Before You Start
• Connect your recorder to internet.
• Congure IP address, sub-netmask, gateway, and DNS server of LAN port.
Steps
1. Go to Conguraon → Network → Advanced Sengs → Plaorm Access .
2. Check Enable.
3. Select
Plaorm Access Mode as Guarding Vision.
Cauon
Valid security code range [6-12]. You can use a combinaon of numbers, lowercase, and
uppercase.
4. Enter a cusmized Security Code. You need to enter the security code when adding the recorder
in guarding vision.
5. Click Save.
6. Visit guarding vision
plaorm.
-
For computer user: Visit dev.guardingvision.com .
-
For mobile phone user: Download Guarding Vision
applicaon in app store or google play.
7. Register an account.
8. Add the recorder by its serial number (a 9-bit character printed in device lable) and security
code.
9. Start live view of your camera.
Mobile Video Recorder User Manual
14