User Manual

4.3 Network Sharing
4.3.1 Set Wi-Fi AP
The recorder can work as a wireless router. Othe devices can access network via the recorder.
Steps
Cauon
You can only turn on one funcon between Wi-Fi AP and Wi-Fi. Turning on one of them will turn
o the other.
1. Go to Conguraon → Network → Advanced Sengs → Wi-Fi AP .
2. Check Enable Wi-Fi AP, Enable AP Broadcast, and Enable WLAN HotSpot.
3.
Congure hotspot parameters.
1) Enter SSID (hotspot name).
2) Select Security Mode.
3) Enter IP Address and Sub-net Mask.
Note
The IP address must be in dierent network segment with TCP/IP address.
4. Check Enable DHCP and enter Start IP Address and End IP Address.
5. Click Save.
4.3.2 Set Network Share
Connect a periphral device to your recorder with a network cable. The periphral device can access
internet
aer the recorder succesfully dialed to internet.
Steps
1. Go to Conguraon → Network → Basic Sengs → TCP/IP → Lan .
2. Check Enable Network Share.
3.
Congure the network parameters for the periphral device.
1) Set its IP address in the same network segment with your recorder.
2) Set its network gateway IP as the recorder IP address.
4. Click Save.
The periphral device can access internet
aer the recorder succesfully dialed to internet.
Mobile Video Recorder User Manual
15