User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
Start the live view and click to display the live view image in full screen.
Press Esc to exit from the full-screen mode.
5.1.9 Channel-Zero
Channel-zero, known as virtual channel, can show the videos from all channels of the recorder,
reducing the bandwidth while simultaneously previewing from mul-channel.
Steps
1. Go to
Conguraon → Video/Audio → Channel-zero .
2. Check Enable Channel-zero Encoding.
3. Select Max. Bitrate and Max. Frame Rate.
4. Click Save.
5. Go to Live View.
6. Double click ZeroChannel 01 in the camera list to start live veiw of channel-zero.
5.2 PTZ
Operaon
Congure PTZ parameters and control PTZ.
5.2.1
Congure PTZ
Follow the steps to set PTZ parameters. The conguraon of the PTZ parameters should be done
before you control the PTZ camera.
Before You Start
Connect the RS-485 cables of the PTZ camera to EXT.DEV interface of the device.
Steps
1. Go to
Conguraon → System → System Sengs → PTZ Cong .
2. Select Channel No. of PTZ camera.
3.
Congure the parameters of the PTZ camera. All the parameters should be exactly the same
with those of the PTZ camera.
4. Click Save.
5.2.2 PTZ Control Panel
Go to Live View. Control PTZ camera via PTZ panel.
Note
PTZ control panel may vary with recorder model.
Mobile Video Recorder User Manual
18