User Manual

Chapter 6 Mobile Device Features
6.1 Timed Shutdown
The recorder will automacally start up/shut down according the schedule.
Before You Start
Wire power cord. For details, refer to quick start guide.
Steps
1. Go to Conguraon → Vehicle → Start .
2. Select Auto Work Type as Auto Working.
3. Set the shutdown schedule. For detailed steps, refer to
Congure Arming Schedule .
4. Oponal: Check Low Power Protect and select Low Power Protect Limit. If the voltage of the
recorder reaches the selected threshold, the recorder will shut down
automacally.
5. Click Save.
6.2 Delayed Shutdown
You can set the shutdown delay me (Vehicle Ignion Startup and Shutdown) for the recorder.
Before You Start
Wire power cord. For details, refer to quick start guide.
Steps
1. Go to Conguraon → Vehicle → Start .
2. Select Auto Work Type as Halt Delay.
3. Select Delay Time.
4. Click Save.
5.
Oponal: Check Low Power Protect and select Low Power Protect Limit. If the voltage of the
recorder reaches the selected percentage, the recorder will shut down automacally.
6.3
Congure Satellite Posioning
The built-in GNSS module supports GPS (Global Posioning System), enabling device posioning
and speed limit alarm.
Before You Start
Install the posioning antenna.
Steps
1. Go to Conguraon → Vehicle → Posion Sengs .
2. Select Posion Module.
Mobile Video Recorder User Manual
20