User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
Chapter 7 Camera Management
7.1 Congure Encoding Parameters
Congure encoding parameters to adjsut live view image and video parameters.
Go to Conguraon → Video/Audio → Video .
In good network situaon, you can set high resoluon and bitrate to improve image quality.
In bad network situaon, you can set low resoluon, bitrate, and frame rate to get uent image.
7.2 Image
Sengs
7.2.1 Set Image Parameters
You can adjust image parameters including bightness, contrast, etc.
Steps
1. Go to Conguraon → Image → Display Sengs .
2. Select Channel No.
3. Select Scene according to actual
situaon.
4. Adjust image parameters as desired.
7.2.2 Set Mirror Type
You can enable mirror image and set mirror type to get suble image.
Steps
1. Go to Conguraon → Image → Display Sengs .
2. Select Mirror Type as desired.
Note
The funcon varies with recorder model.
7.2.3 Restore Default Parameters
You can restore image parameters to defaults.
Go to
Conguraon → Image → Display Sengs , select Channel No., and click Default.
Mobile Video Recorder User Manual
23