User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
7.3 Set OSD Parameters
Congure the camera name, OSD (On Screen Display) sengs, etc.
Steps
1. Go to
Conguraon → Image → OSD Sengs .
2. Select Channel No.
3. Enter Camera Name, select Time Format and Date Format.
4.
Oponal: Check Display Name, Dispaly Date, and Display Week as your desire.
5. Set OSD Display Mode.
6.
Oponal: To display text on OSD, check one text overlay and enter text.
7. Drag the red frame on live view window to adjust OSD posion.
8. Click Save.
Result
The check display contents will be overlaied on the live view image and videos.
7.4 Set Privacy Mask
The privacy mask can be used to protect personal privacy by concealing parts of the image from
view or recording with a masked area.
Up to four privacy mask areas are supported for each channel.
Steps
1. Go to
Conguraon → Image → Privacy Mask .
2. Select Channel No.
3. Check Enable Privacy Mask.
4. Draw
detecon area.
1) Click Draw Area.
2) In preview area, drag to draw the
detecon area.
3) Click Stop Drawing.
5. Click Save.
Result
The image of drawn area will be shield in the live view and videos.
Mobile Video Recorder User Manual
24