User Manual

3. Enter smart terminal
informaon.
4. Click Save.
8.2.2 Set Arming
In the set arming period, the recorder will trigger specied linkage method when the concerned
driving behavior is detected.
Steps
1. Go to
Conguraon → Event → Basic Event → Driving Behaviors .
2. Select Channel No. and Driving Behaviors. The channel should be network camera that
connected to both the added smart terminal and the recorder.
3. Check Enable.
4.
Congure arming schedule. For detailed steps, refer to Congure Arming Schedule .
5.
Congure linkage method. For detailed steps, refer to Congure Linkage Acons .
6. Click Save.
Mobile Video Recorder User Manual
27