User Manual

Chapter 9 Events and Alarms
9.1 Congure Moon Detecon Alarm
When moon detecon alarm is congured, once a moon event is detected, the device starts to
record and mulple linkage acons will be triggered.
Steps
1. Go to Conguraon → Event → Basic Event → Moon Detecon .
2. Select Channel No.
3. Draw
detecon area.
1) Click Draw Area.
2) In preview area, drag to draw the
detecon area.
3) Click Stop Drawing.
4.
Congure arming schedule. For detailed steps, refer to Congure Arming Schedule .
5. Congure linkage method. For detailed steps, refer to Congure Linkage Acons .
6. Set Sensivity.
7. Click Save.
9.2
Congure Video Loss Alarm
When the recorder cannot receive video signal from the analog cameras, the video loss alarm will
be triggered. Linkage acons, including audible warning and alarm output, can be set to respond.
Steps
1. Go to Conguraon → Event → Basic Event → Video Loss .
2. Check Enable Video Loss
Detecon.
3. Congure arming schedule. For detailed steps, refer to Congure Arming Schedule .
4.
Congure linkage method. For detailed steps, refer to Congure Linkage Acons .
5. Click Save.
9.3
Congure Video Tampering Alarm
A tampering alarm is triggered when the camera is covered and the monitoring area cannot be
viewed. Linkage
acons, including audible warning, alarm output, can be set to respond.
Steps
1. Go to Conguraon → Event → Basic Event → Video Tamptering .
2. Select Channel No.
3. Draw
detecon area.
1) Click Draw Area.
2) In preview area, drag to draw the detecon area.
Mobile Video Recorder User Manual
28