User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
9.6 Congure Excepon Alarm
Congure alarms which are triggered by excepons to take necessary acons in me.
Steps
1. Go to
Conguraon → Event → Basic Event → Excepon .
2. Select
Excepon Type.
3. Congure linkage method. For detailed steps, refer to Congure Linkage Acons .
4.
Click Save.
9.7 Congure Arming Schedule
Steps
1. Drag in
me line to draw a arming period.
2. Adjust the set arming period.
-
Click a period and adjust its length.
-
Click a period, enter start
me and end me, and click Save.
-
Click Delete All to delete all periods.
Note
Up to 8 me periods can be set for each day and each of the me periods cannot be
overlapped.
3. Oponal: Click Copy to and select desired days to copy the above sengs to other days.
4. Click Save.
9.8
Congure Linkage Acons
Check Linkage Method, select Sengs, check the linkage acons needed, click Apply and OK.
Note
Linkage acons vary with event type.
9.8.1 Trigger Recording
To trigger recording when an event occurs, check Trigger Recording.
9.8.2 Trigger Audible Warning
To generate an audible warning when an event occurs, check Trigger Audible Warning.
Mobile Video Recorder User Manual
30