User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
11.9 Congure Local Output
You can congure local output and resoluon remotely.
Go to Conguraon → System → System Sengs → Menu Output to congure Menu Output and
Resoluon.
Note
The funcon varies with model.
11.10 Congure RS-232
To debug recorder via serial port or connect serial device, you can congure RS-232 parameters.
Before You Start
Connect a serial device to your recorder RS-232 interface.
Steps
1. Go to Conguraon → System → System Sengs → Serial Cong .
2. Select COM port the serial device connects to.
3. EditBaudrate, Data Bit, Stop Bit, Parity, and Flow Control.
4. Select Usage.
Console
Connect a computer to the recorder through the computer serial port. Recorder parameters
can be
congured by using soware such as HyperTerminal. The serial port parameters must
be the same as of the recorder when connecng with the computer serial port.
Transparent Channel
Connect a serial device directly to the recorder. The serial device will be controlled remotely
by the computer through the network and the protocol of the serial device. If alarm
buon is
connected, select RS-232 usage as Transparent Channel.
5. Click Save.
Mobile Video Recorder User Manual
36