User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
Chapter 12 Local Menu Operaon
Connect a display and a mouse to recorder, you can operate the recorder locally.
12.1 IP Camera Adding
The secon is only available for the recorder that supports network camera.
12.1.1 Acvate IP Camera
Before adding an IP camera, acvate it by seng a password for it.
Before You Start
Connect the IP camera to IP camera interface in the recorder rear panel.
Steps
1. Go to Menu → Other
Sengs → IPC Sengs .
2. Click Manual Management.
3. Select an
inacvated IP camera.
4.
Acvate the selected IP camera.
-
Click Quick
Acve. The IP camera password will be set as the same with the device password.
-
Click Manu Acve and enter the same password in New Password and Conrm.
Cauon
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
12.1.2 Add IP Camera
Before You Start
The IP camera is acve.
Steps
1. Select Menu → Other Sengs → IPC Sengs
2. Uncheck Auto Add and click Manage IP Camera.
3. Edit camera IP address.
1) Select an IP camera and click Edit.
2) Enter an IP address that is in the same network segment with the recorder.
Mobile Video Recorder User Manual
37