User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Chapter 1 Product Introduction
- Chapter 2 Start Up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Configuration
- Chapter 9 Events and Alarms
- Chapter 10 Security
- Chapter 11 Maintenance
- Chapter 12 Local Menu Operation
4. Add the IP camera.
1) Click ManuAdd.
2) Select IP channel No. for the IP camera.
3) Edit the required
informaon.
4) Click OK.
12.1.3 Edit IP Camera
You can edit or delete added IP cameras.
Steps
1. Go to Menu → Other Sengs → IPC Sengs .
2.
Oponal: You can change the parameters of the added IP cameras.
1) Select an IP camera.
2) Edit the parameters. If you change the IP address, you will connect to another IP camera.
3) Click OK.
3.
Oponal: Select an IP camera, click Delete to delete the IP camera.
12.2 Recording
To record the videos for connected cameras, you need to install a storage media and format it, and
congure the recording schedule.
12.2.1 Format Storage Media
A newly installed storage media must be formaed before it can be used.
Before You Start
Install storage media.
Steps
1. Go to Menu → Storage .
2. Check storage media to format.
3. Click Format.
Aer format, the storage media Status should be Normal.
12.2.2
Congure Recording Schedule
All-day recording is on by default. Device will start and stop recording according to the congured
recording schedule.
Before You Start
Install storage media and format it.
Mobile Video Recorder User Manual
38