Installation Instruction
8
9 10
11
Power on
Connector the katallobar with car baery,once start the car,
device will start the video automacally.
When the car is off,device will turn into Parking Monitoring mode and
start to record once the current scene changed or collision happened.
BT remote control
You can start recording and capturing via Bluetooth remote
control, an oponal accessory.
Step Press the capture buon to capture a picture. If you
has enabled the Linkage Recording funcon in mobile app, a
12-second video of 6 seconds before and 6 seconds aer the
capture will be saved
•
•
•
Power on the device and into preview interface.
change the chanel by slide le/right(if with second camera).
Slide down the main interface.we have shortcut key to turn on/off
Wi-Fi,BT,GPS,Speaker,Recording
Click the screen and slide le,we can go into the main menu
Recording
Opon1:Through BT remote module to turn on/off the voice recording.
Opon:Enter into “System seng-video parameter-voice in recording”.
Opon3:By Hikdashcam APP.
Seng the calibraon line
Please adjust the calibraon line aer your first power on to improve
the veracity of ADAS。
Step1: Parking the car in a open field
Step2: Slide right the screen and open the calibraon interface
Step3:Adjust the angle of the lens,make the calibraon line coincide
with the the horizon line
Calibration line
Slide le the screen and enter into main menu,choose “System seng”
to adjust the device parameter.
Update
Opon2:Compable with 4G module and detect the latest SW
version,can also support download and update (Need compable
with 4G module).
Opon1:Through Hikdashcam APP
Step1:Power on the device and open Wi-Fi to connect the APP.
Step2:Check the latest SW version in the APP.
Step3:Choose “System seng-SW update”.
Step4:Once firmware updated,device will restart ,then we finished.
Dont power off during the upgrade
ADAS
Choose “ADAS”,can turn on several intelligent auxiliary driving funcons,
and the veracity will improved connuously by SW update
Other Parameters
“System Seng->About device”,check the device and SW version
“Video recording”can set different resoluon。
“Image Parameter”Can on/off “WDR/Distoron Correcon”,
suggest to open WDR when the backlight
“Format SD card”clear the data in the card。
“G-sensor”turn on,Device will make a emergent video once the car
have emergency brake or turn
F Basic operaonF Basic operaon F Basic Operaon G Prevenons and Cauonary Tips
E Mobile Phone Connecon
<
Try to install BT module avoid the airbags for your safety
•
•
•
•
•
•
•
•
•
Scan the QR code to download the HikDashcam app.
Add the dashcam in app by connecng
to its Wi-Fi.
Step 1 .Run the HikDashcam app.
Step 2 .In Wi-Fi list, select the Wi-Fi
name of target dashcam and enter
WiFi password to build connecon.
Dashcam Wi-Fi default parameters:
•Wi-Fi name: HIKVISION-XXXX (XXXX refers to the last four
characters of verificaon code.)
•Wi-Fi password: 1234567890
1
2
3
The voice recording can set on or off during the video and we have 3
ways to realize
Aauons for TF cards
· For the stability and efficiency of data storage, Please purchase TF
cards from offical channels. It is recommended to use TF cards with
Class 10 or more than 16G high speed TF card.
·
Before pulling out the TF card, please make sure that the equipment
is powered off, so as not to damage the TF card.
It is recommended to format the TF card once a month.
Please replace the TF card regularly to avoid the TF card exceeding
its service life and unable to store data.
Aauons for Capacitor Use
Super capacitors are built in the equipment. Please do not disassemble
or refit the equipment capacitors to avoid capacitor damage.
Do not discard capacitors or use them in other devices at will.
Do not use damaged power supply.
Do not place capacitors in high temperature or near fire , otherwise
capacitors will easily explode.
Abnormal phenomena such as deformaon, excessive temperature
and odor are found during the use of capacitors. Please stop using,
so as to avoid safety problems.
Trouble Soluon
The dashcam drops
easily.
Starng dashcam
failed.
The dashcam powers
off frequently.
Recording is abnormal
and recording indicator
is unlit.
Recorded videos are
fuzzy.
It takes a long me to
connect the dashcam
WiFi.
Playing video via app
failed.
Failed to detect the TF
card when connecng
the dashcam and your
computer with the power
cord.
The dashcam does not support data
transmission. And the power cord is only
for charging. If you need to transfer data,
take out the TF and connect it to your
computer.
The trouble may be relevant with the
mobile phone player or system.Insert TF
card into your computer to play the videos.
Audio is not recorded
with video.
Connecng the
dashcam via app failed.
Clean the glass before installaon.
•
•
Ensure the automobile started
normallyand the power supply is normal.
If no indicator is lighng, reconnect
the cigaree lighter.
•
•
Ensure the power cord is well.
•
Ensure the connecon between dashcam
and power cord is well.
It may be caused by the interference of
the surrounding Wi-Fi signals. You can
operate the dashcam in an environment
with less interference.
Close unnecessary programs in your
mobile phone to release some resources
for the dashcam app.
• Tear off the proof film on lens.
•
Clean the lens and glass.
Ensure the app is well installed.
Restart the app and dashcam.
Enable "Tape When Recording" in app.
Ensure the dashcam started normally.
Ensure TF card is installed.
Check TF card status, e.g., itsformat and
lifespan. If it is not well,replace it with a
good one.
•
•
•
•
•
•
Trouble Soluon
TF card on the computer to read requires
a dedicated player.
•
•
•
•
•
H Trouble Shoong H Trouble Shoong
•
•
•
•
•
•
•
•