Spec Sheet
© 2020 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice.
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1
Tel: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail: sales.usa@hikvision.com • www.hikvision.com 030520NA
Special Installation Instructions for Select Cameras Only
Some cameras require the following instructions when installing the CB135 (e.g., DS-2CD23x5G1,
DS-2CD23x7G1, DS-2TD1217-2/3/6/V1, and others).
1.
Twist to remove trim ring from
camera mounting
base.
2. Loosen locking screw on camera mounting
base.
3. Detach camera mounting base from camera.
4. Position camera mounting base on CB135
conduit base.
5. Align four screw holes on the camera mounting
base to the four inner screw hole posts on the
CB135.
6. Attach camera mounting base to the CB135 with
four screws.
Do not use the three outer screw
holes on the CB135 rim; you must use
the four inner screw hole posts.
Figure 1, Attaching CB135 to a
Select Camera Model (Typical)