Spec Sheet

© 2019 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice.
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1
Tel: [phone] • Toll Free in USA: [phone] • E-Mail: [e-mail] • www.hikvision.com Rev. 091819NA

CB140-DM45
Junction Box
• Aluminum Alloy with Surface Spray Treatment
• Side and Bottom Inlets
• Interchangeable Bottom, Water-Resistant
Cover, and Side Gland Nut
• Applies to Indoor and Outdoor Conditions
Install the junction box on a flat surface.
The included waterproof rubber gasket is
necessary for outdoor applications.
The wall must be capable of supporting at least
three times as much as the total weight of the
camera and the junction box.
The maximum load capacity of the junction box is
3 kg (6.6 lb).
Available Models:
CB140-DM45
Specifications
Parameters
CB140-DM45 Junction Box
Appearance Hikvision white
Material
Aluminum alloy
Dimension Φ140 mm × 40 mm (Φ5.51" × 1.57")
Weight
Approximately 237 g (0.52 lb)
Dimensions