User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Keyboard Configuration
- Chapter3 Keyboard Operation
- Appendix 1: Specifications
- Appendix 2: FTP Upgrade
User Manual of DS-1100KI Network Keyboard
16
3.1.2 Input Settings
Click Input Set on the
main interface to enter the
Input Settings menu.
The list has displayed all device channels which can be
controlled by the current login user.
Note: The channel name shown in the Monitor Name is
obtained from the corresponding channel of device.
Modify Monitor: In the “Input Settings-Input List”
menu, click
to modify the channel name of the
device.
Note: The monitor No. should be set uniquely from 0 to
9999.
Input Group: Click Input Group to enter the “Input
Settings-Input Group” interface. Click
to select the
group No. from the drop-down menu.
Note: Up to 16 groups can be configured.
Delete Monitor: User can click
to delete the added
monitor.
Add Monitor: Click Add Monitor to enter the “Input
Settings-Add Monitor” menu.
Select the monitor by clicking the checkbox and then
click Add.
In the “Input Settings-Input Group” interface, the added
monitors can be displayed in the list.