User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Keyboard Configuration
- Chapter3 Keyboard Operation
- Appendix 1: Specifications
- Appendix 2: FTP Upgrade
User Manual of DS-1100KI Network Keyboard
18
3.1.4 Macro Settings
The macro command can be used for operating a series of continuous actions in sequence.
Operation: Press the “Num+MAC” keys to call the programmed macro command.
Click Macro Set on the main interface to enter the
Macro Settings menu.
Add Macro: Click Add Macro to enter the “Macro
Setting-Add Macro” interface. Edit the macro name,
and press the command keys on the keyboard to enter
the text box below. Finally, click Add to add the current
macro command.
Note:
1. Up to 128 macro commands can be added.
2. The local decoding and preview operation is not
supported currently.
View Macro: In the Macro Settings interface, click
to view the added macro command.
Run Macro: Click in the list to run the macro
command, or directly click “Num+MAC” keys on the
interface to call the macro command.
Delete Macro: User can click
to delete the added
macro command.