User Manual

User Manual of DS-1100KI Network Keyboard
20
3.1.8 Reboot
Click Reboot on the main interface, the message box
“Are you sure you want to reboot now?” will pop up.
Click Yes to confirm the reboot, or No to cancel the
operation.
3.1.9 Shutdown
Click Shutdown on the main interface, the message box
“Are you sure you want to shut down now?” will pop
up. Click Yes to confirm the shutdown, or No to cancel
the operation.
3.2 Shortcut Operation
The operating user must log in the keyboard to realize all shortcut operations (except LOCK).
Shortcut Operation: Press the Num keys or SET button
on the keyboard to enter the shortcuts operation
interface.
Note:
1. When user enters the shortcuts operation interface
by inputting the Num key, press ESC to cancel the
inputted numeral from the screen and start the
shortcut operation.
2. When user enters the shortcuts operation interface
by inputting the SET key, user should press it again
before starting the shortcut operation.
In the shortcuts operation interface, the left part has
displayed the current output channel, and user can
select different window-division display modes, set
input channel for each window, or configure other
shortcut operations.
And the right part of the interface is used for displaying
the current key input and some shortcut operations.
Lock: The LOCK button on the keyboard is used to lock the keyboard and mouse operation. After being locked, it is
unallowable to operate all keys (except LOCK), joystick, mouse and the touch screen.