User Manual

User Manual of DS-1100KI Network Keyboard
24
Operation:
1. Press the SET key to enter the tour settings interface.
2. Press the Num + TOUR keys to set the selected tour.
3. Press the Num + ENTER keys to set the dwell time of
the camera and the camera number respectively.
4. Press the SET key to finish the tour settings.
Note: The tour settings will not be saved after the
keyboard is rebooted.
Up to 8 tours can be supported currently.
The dwell time of the tour is the length of time used for switching from one camera to the next camera in the tour.
All cameras are set with the same dwell time.
Note:
1. All programmed parameters will be cleared if user presses the Num + TOUR keys again in the process of
setting tour.
2. Corresponding error message will appear on the screen when user performs wrong operation.
3.2.2.7 Call Tour
Operation:
1. Press the Num + MON keys to select the monitor
for display.
2. Press the Num + TOUR keys to call the programmed
tour to be displayed on the selected monitor.
3.2.2.8 Set Group Tour
Multiple camera groups can be displayed on the specified monitors in tour respectively. Each user is allowed to set
up to 8 group tours, and each group can include 8 camera groups to specified monitors.
When the system is not in the playback mode, user can directly press the SET key and then Num + GROUP keys to
enter the group tour settings interface.
Operation:
1. Press the SET key to enter the settings interface.
2. Press the Num + GROUP keys to set the group tour.
3. Press the Num + ENTER keys to set the monitor
(MON) number.
4. Press the Num + ENTER keys to set the camera
group (CAM-G) number.
5. Repeat step 3-4 to set other monitors and camera
groups.
6. Press the SET key to finish the group tour settings.