User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Keyboard Configuration
- Chapter3 Keyboard Operation
- Appendix 1: Specifications
- Appendix 2: FTP Upgrade
User Manual of DS-1100KI Network Keyboard
26
Press the key again to restore the normal playback.
2. If the current playback operation has been stopped, it is invalid to press the
button.
3. If is needs to the re-configure the playback time when the selected MON (＋WIN) is in playback mode, user
should press the STOP key to stop the current playback first and then press the
key to enter the
playback settings interface.
Other playback operation: Rotate the outer ring of the shutter in clockwise direction to speed up the playback,
with the max. speed capable of reaching 16X. And by rotating the outer ring of the shutter in anti-clockwise
direction user can speed down the playback, with the min. speed capable of reaching 1/16X.
Note: Currently the inner ring of the shutter is supports no operation.
3.2.3 PTZ Control
3.2.3.1 PTZ Control Function
If the camera connected to the keyboard supports PTZ function, the user is allowed to operate the
LIGHT/FOCUS/IRIS/ZOOM buttons to realize PTZ control.
Two operation methods can be used to realize PTZ control:
Method 1:
1. Input the Num + MON keys to select the monitor.
2. Input the Num + WIN keys to select the display window.
Note: When the current window is in cycle view mode, the keyboard will be unable to automatically connect with
the camera and now it is invalid to operate the joystick.
Method 2:
1. Input the Num + CAM keys to directly select the camera.
2. When the camera connected to the keyboard supports PTZ function, operate the joystick and
LIGHT/WIPER/FOCUS±/IRIS±/ZOOM buttons to realize PTZ control.
3.2.3.2 Set Preset
Select the output monitor or window and the keyboard is capable of automatically connecting with its
corresponding camera. Operate the joystick to move PTZ to the desired position and then press the PRESET key to
complete the preset settings. The user is also allowed to directly select the camera by inputting Num + CAM keys
and then press the PRESET key to start patrol settings.
Set Preset by Output Channel
Operation:
1. Input the Num + MON keys to select the output
channel.
2. Input the Num + WIN keys to select the display
window.
3. Operate the joystick to move PTZ to the desired
position.
4. Press the Num + PRESET keys to set the current
position as the preset with entered number.
Note: Corresponding error message will appear on the screen when user performs wrong operation.