User Manual

User Manual of DS-1100KI Network Keyboard
28
3.2.3.4 Set Patrol
Select the output monitor or window and the keyboard is capable of automatically connecting with its
corresponding camera. Press the SET key on the keyboard and then press PATROL key to enter the patrol settings
interface. The user is also allowed to directly select the camera by inputting Num + CAM keys and then press the
SET key to start patrol settings.
Set Patrol by Output Channel
Operation:
4. Input the Num + MON keys to select the output
channel.
5. Input the Num + WIN keys to select the display
window.
6. Press the SET key to enter the settings interface.
7. Press the Num + PATROL keys to enter the patrol
settings interface.
8. Input Num and press the ENTER key to set the
preset number, stop time and speed respectively.
9. Press the SET key again to finish the patrol
settings.
Note:
1. Corresponding error message will appear on the screen when user performs wrong operation.
2. All programmed parameters will be cleared if user presses the Num + PATROL keys again in the process of
setting the patrol.
Set Patrol by Input Channel
Operation:
1. Input the Num + CAM keys to select the input
channel.
2. Press the SET key to enter the settings interface.
3. Press the Num + PATROL keys to enter the patrol
settings interface.
4. Input Num and press the ENTER key to set the
preset number, stop time and speed respectively.
5. Press the SET key again to finish the patrol
settings.
Note:
1. It is invalid to input the 0+CAM keys in the current operation mode.
2. Corresponding error message will appear on the screen when user performs wrong operation.
3.2.3.5 Call Patrol
Select the output monitor or window and the keyboard is capable of automatically connecting with its
corresponding camera. Press the PATROL key on the keyboard to call the programmed patrol. The user is also
allowed to directly select the camera and then press the PATROL key to realize patrol callup.