User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Keyboard Configuration
- Chapter3 Keyboard Operation
- Appendix 1: Specifications
- Appendix 2: FTP Upgrade
User Manual of DS-1100KI Network Keyboard
30
Set Pattern by Input Channel
Operation:
1. Input the Num + CAM keys to select the input
channel.
2. Press the SET key to enter the settings interface.
3. Press the Num + PATTERN keys to set the pattern
number.
4. Operate the joystick to control PTZ movement.
5. Press the SET key again to finish the pattern
settings.
Note: Corresponding error message will appear on the screen when user performs wrong operation.
3.2.3.7 Call Pattern
Select the output monitor or window and the keyboard is capable of automatically connecting with its
corresponding camera. Press the PATTERN key on the keyboard to call the programmed pattern. The user is also
allowed to directly select the camera by inputting Num + CAM keys and then press the PATTERN key to realize
pattern callup.
Call Pattern by Output Channel
Operation:
7. Input the Num + MON keys to select the output
channel.
8. Input the Num + WIN keys to select the display
window.
9. Press the Num + PATTERN
keys to call the
programmed pattern.
Note: This operation is valid only when the pattern
function is supported by the connected camera/dome.
Call Pattern by Input Channel
Operation:
5. Input the Num + CAM keys to select the input
channel.
6. Press the Num + PATTERN
keys to call the
programmed pattern.
Note: It is invalid to input the 0+CAM keys in the
current operation mode.
Note: Corresponding error message will appear on the screen when user performs wrong operation.