User Manual

User Manual of DS-1100KI Network Keyboard
31
3.2.4 Aux Functions
The keyboard is designed with AUX1 and AUX2 keys on its panel. User is allowed to configure Aux function for
AUX1/AUX2 key on the operator user interface. By default settings, the AUX1 is selected to Voice Talk and the
AUX2 to Picture Capture function.
3.2.4.1 Voice Talk
The voice talk between the keyboard and the currently selected device can be realized through Aux key.
Start voice talk with the output channel:
1. Input the Num + MON keys to select the output channel.
2. Press the AUX1/AUX2 key to start voice talking.
Start voice talk with the input channel:
1. Input the Num + CAM keys to select the input channel.
2. Press the AUX1/AUX2 key (configured with the Voice Talk function) t to start voice talking.
During the voice talking:
1. User can stop it by pressing the “0+AUX1/AUX2” keys;
2. When user inputs “Num + MON” keys and then presses the “AUX1/AUX2”key, it will switch the keyboard to
take voice talk with the nearest device;
3. If it needs to take voice talk with the camera, it needs to press the ESC key, input the “Num + CAM” keys and
then press the “AUX1/AUX2”key to start the voice talk.
When the network is disconnected in the process of voice talking, user should press the “0+AUX1/AUX2” keys to
stop the voice talking first and then start it again. When user intends to start the voice talk between the keyboard
and the remote device which is taking voice talk with other device, the error message will appear on the screen.
Note: When the current window is configured with more than channels for display (in cycle view mode), the error
message will appear on the screen as well.
3.2.4.2 Picture Capture
The video picture from the camera can be captured and saved in U-flash disk through the keyboard operation.
1. Input the Num + MON keys to select the output channel.
2. Input the Num + WIN keys to select the display window.
3. Press the AUX1/AUX2 key (configured with the Picture Capture function) to start picture capture.
Note: When the current window is configured with multiple channels for display (in cycle view mode), the error
message will appear on the screen as well.
3.2.4.3 Recording
The video from the camera can be recorded and saved in the local U-flash disk as well. Operate the following
steps:
1. Input the Num + MON keys to select the output channel.
2. Input the Num + WIN keys to select the display window.
3. Press the REC key to start video recording.