User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Keyboard Configuration
- Chapter3 Keyboard Operation
- Appendix 1: Specifications
- Appendix 2: FTP Upgrade
User Manual of DS-1100KI Network Keyboard
32
Note: During the recording, the REC key on the keyboard lights in red. When user exits the operation interface,
the recording continues and user is allowed to stop it. When the window is configured with multiple channels for
display (in cycle view mode), the error message will appear on the screen. And if the current window or output
channel is performing playback by time, then the recording operation is not allowed.
3.2.4.4 Other Functions
The PREV and NEXT keys on the keyboard are used to select the previous or next camera during the shortcut
operation.
Operation method 1:
1. Input the Num + MON keys to select the output channel.
2. Input the Num + WIN keys to select the display window.
3. Press the PREV/NEXT key to select the previous or next camera.
Note: If the current window is not in the dynamic decoding mode, it is invalid to press the PREV/NEXT key. When
the window is configured with multiple channels for display (in cycle view mode), the error message will appear
on the screen.
Operation method 2:
1. Input the Num + CAM keys to select the input channel.
2. Press the PREV/NEXT key to select the previous or next camera.