User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Keyboard Configuration
- Chapter3 Keyboard Operation
- Appendix 1: Specifications
- Appendix 2: FTP Upgrade
User Manual of DS-1100KI Network Keyboard
6
2.1 Keyboard Management
Click Keyboard on the admin main interface to enter the keyboard management menu.
2.1.1 Network Settings
Configure the network settings of the keyboard,
including the Port, IP address, Subnet Mask and
Default Gateway, and finally click Apply to save the
settings.
Note: Make sure the DHCP is supported by the router
before enabling the function.
2.1.2 Hardware Settings
Key Sound/Alarm Sound/Key Light
: Click the
corresponding checkbox to
to enable the
function, or remain it as to disable the function.
Key Lock Timeout, Scr-close Timeout: Use the
or
to decrease or increase the key lock timeout and
the screen-close timeout, with the max. value of 10s
and the min. value of 0s.
Transparency: Click
to select the value from the
drop-down menu, with the 3: 1, 1: 1, 1: 3 and non
transparent optional.
Note: The Transparency refers to the contrast of the
local decoded video and menu, and is valid only for the
local live view.
Mouse Speed: Select the mouse speed to level 0~2 or
1~3.
Brightness: Select the screen brightness to level 0~3.
Click Apply to save the settings.