User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Keyboard Configuration
- Chapter3 Keyboard Operation
- Appendix 1: Specifications
- Appendix 2: FTP Upgrade
User Manual of DS-1100KI Network Keyboard
8
Use the touch pen to click the three spots marked as
“+” by following the hints and then the system will pop
up the attention “Screen verify successfully”, click OK to
finish the operation.
2.1.6 Upgrade
FTP Upgrade: input the address of the FTP server and
then click FTP Upgrade to operate the upgrade.
Note: User must create the FTP server connection first
by TFTP or WFTP in PC before operating the FTP
upgrade. Please refer to Appendix2 for the upgrading.
If the upgrading is failed, the corresponding error
message box will be popped up.
Note: When the upgrading is successful, the keyboard
will restart automatically to complete the upgrade.
USB Upgrade: Insert the U flash disk to the USB
interface and then click USB Upgrade to enter the USB
upgrade interface. Select the upgrade file from the disk
and finally click Upgrade to start upgrading.
Note: The upgrade file must be digicap.dav.