DS-1200KI/DS-1006KI Keyboard User Manual UD03129N
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual About this Manual This Manual is applicable to DS-1200KI/1006KI Keyboard. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Regulatory Information FCC information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Safety Instructions Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Table of Contents Chapter 1 Overview .......................................................................................................................... 1 1.1 Features .............................................................................................................................. 1 1.2 Appearance ........................................................................................................................
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 5.7 Maintenance .................................................................................................................... 28 Chapter 6 Specifications .................................................................................................................
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Chapter 1 Overview 1.1 Features 128 x 64 screen 4-axis joystick Accessible to the Multi-functional Video Center (MVC), Matrix Access Gateway (VAG), Video Wall Controller, Decoder, etc.; and shortcut operation of camera/camera groups switch on video wall Connectable to dome and realize PTZ control and picture capture by joystick operation Accessible to DVR via network or serial port, and operation of front panel buttons.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 1.2 Appearance Refer to Figure 1-1 for the appearance of the keyboard. Figure 1-1 Keyboard Appearance 1.3 Interfaces and Joystick Refer to Figure 1-2 for the interfaces and joystick of the keyboard.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Table 1-1 Description of Rear Panel SN Item Description 4-axis joystick In menu mode, Move to up/down to select the menu for confguration Move to left/right to select items in menu. When entering the value in the field, move to the left to clear the previous character. Press the central button to confirm the enter is used as Enter button.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 1.4 Functional Buttons 5 1 4 3 2 Figure 1-3 Functional Buttons Table 1-2 Description of Rear Panel SN 1 Item Common Buttons Video Wall Control Button Description SET Enter the main menu of the system. MODE Enter the 6 operation modes interface. OK Confirm the selection and operation. ESC Cancel and back to the pervious menu. MON In the shortcut operation mode, use with the numeric buttons to select the monitor.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual PATROL/PLAY 3 4 Alphanumeric Buttons Use with the numeric buttons to call the patrol. Start playing the video files in DVR operation mode. WIN In the shortcut operation mode, use with the numeric buttons to select window of video wall. MULT In the shortcut operation mode, use with the numeric buttons to select the window division modes of video wall.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual FOCUS-/MULT IRIS+/EDIT IRIS-/PTZ 5 LCD Display In PTZ control mode, operate the focus near. In DVR operation mode, the same with the MULT button on the DVR panel. In PTZ control mode, operate the iris open. In DVR operation mode, the same with the EDIT button on the DVR panel. In PTZ control mode, operate the iris close. In DVR operation mode, the same with the PTZ button on the DVR panel.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Chapter 2 Getting Started 2.1 Activating Your Device Purpose: For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. You can also activate the device via SADP as well. Step 1 In the Device Activation interface, enter the admin passwords in the text field of Admin Password and Confirm.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Local Login Step 1 In the Login interface, enter the user name in the User Name field. Step 2 Enter the password in the Password field. Figure 2-2 Login Interface Step 3 Press the OK button to log in to the device. In the Login dialog box, if you enter the wrong password 7 times for admin user or 5 times for operators, the current user account will be locked for 30 minutes.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 2.3 System Menu After login, you enter the system menu for configuration and operation.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Chapter 3 Basic Configuration 3.1 Network Access Settings You shall acknowledge that the use of the product with the Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection. If the product does not work properly, contact with your dealer or the nearest service center. The network connection is provided by the DS-1200KI keyboard only.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Figure 3-1 Device Management Interface Step 2 On the Device Management > Device List page, select a device type (IPC/IP Dome, DVR/NVR or Decoder) and click Add to add the devices. Figure 3-2 Add Device Step 3 You can add the device by IP or by IP segment. Enter the network parameters, including the IP address, port, login user name and password. Step 4 Click OK to save the settings. The successfully added device is shown in the list.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual You can also click the Add SADP to add the online devices in the same network segment. 3.2.2 Managing Input/Output Channels Purpose: You can manage the import and export of input channels in batch, input group and output channels via Web browser. Importing and Exporting Input Channel List Step 1 Enter the Device Management > Input Channel > Input List page.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Up to 16 input groups can be added. Figure 3-5 Manage Input Group Step 4 You can modify the group information or delete the group by Modify Group and Delete Group access. Managing Output Channel Step 1 Enter the Device Management > Output Channel page. Step 2 You can check the output channel information, or select an output channel from the list and edit the channel ID. 3.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Figure 3-6 Add User Step 2 Edit the user name, enter password (strong password is highly recommended), and confirm the password. STRONG PASSWORD RECOMMENDED–We highly recommend that you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Chapter 4 Keyboard Operation Step 1 On the login interface, enter the user name and password to log in to the device. Figure 4-1 Menu Step 2 Press the MODE button on the panel to enter the operation for different device.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 6 Dome by The keyboard can connect with the analog dome or PTZ unit RS-485 via RS-485 serial port, and realize PTZ control. Step 3 Use the joystick to select an operation mode and press OK button to enter the operation. 4.1 Keyboard Operation The keyboard can be used for managing the devices (including the IPC, IP dome, DVR/NVR, MVC, decoder, video wall controller, etc.) for control. 4.1.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Step 5 Press the Num + CAM/CAM-G buttons to select the input channel or input channel group. You can press the PREV/NEXT buttons to switch to the previous or next camera / camera group ID. You can press the 0 + CAM buttons to stop decoding of the current camera, or press the 0 + CAMG buttons to stop cycle decoding of the camera group. Figure 4-3 Video Wall Operation Step 6 Operate the PTZ control on the video wall.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Figure 4-4 Preset Calling The preset/patrol/pattern must be pre-configured. 4.1.3 Scene Calling Purpose: For the MVC, video wall controller, and decoder added to the keyboard, you can configure the scene via the iVMS 4200 client first and follow the steps below to switch the scene. Step 1 In the Keyboard operation mode, press the Num + DEV buttons on the keyboard panel to select the device ID (decoder, MVC and video wall controller).
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Step 2 Log in to keyboard via Web browser (https://ip address), and enter the Aux key settings page (System Management>Aux Key Settings). Step 3 Set the Aux key function to Screen Jointing. Step 4 Click Save to save the settings. Figure 4-6 Aux Key Settings Step 5 In the keyboard operation mode, 1) Press the Num + DEV buttons to select the device ID. 2) Press the Num + AUX/F2 buttons to operate screen jointing for the video wall.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 2) Press the Num + MON buttons to select the display window for the output channel. 3) Press the Num + CAM buttons to select the input channel. Step 5 Press the AUX/F2 button on the keyboard panel to capture the picture. The picture is saved in the U-flash disk in FAT32 format. You can also use the central button of the joystick to capture the picture in keyboard operation mode. 4.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Figure 4-9 MAG by IP For the initial use of MAG/MVC, you must use the configuration kits software to configure the input/output channel ID of the MAG/MVC. Please refer to the user manual of MVC for details. The input/output channel ID is used for switching on the video wall or PTZ control during keyboard operation. Step 7 Operate the PTZ control on the video wall. Refer to Step 6 in Chapter 4.1.1 for details. 4.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Figure 4-11 DVR by IP Step 5 Operate the buttons on the keyboard panel to realize the corresponding functions. Please refer to Chapter 1.4 Functional Buttons to check the description of the DVR control buttons. 4.4 MAG by RS-422 The keyboard can connect with the matrix access gateway or MVC via RS-422 serial port, and realize the video wall control, PTZ control, etc.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Figure 4-13 Network Cable Step 1 Enter the MAG by RS-422 operation mode on the keyboard. Step 2 Press the Num + MON buttons to select the display window for the output channel. Step 3 Press the Num + WIN buttons to set the window to play the decoded video. Step 4 Press the Num + CAM buttons to select the input channel. Figure 4-14 Matrix Operation Step 5 You can operate the PTZ control on the video wall for the connected dome.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Before you start: Check the connection between the DVR/NVR and the Keyboard. The T+ ad T- terminals of the keyboard’s RS-485 serial port must be connected with the D+ and D- terminals of the KB port on the DVR rear panel respectively. Figure 4-15 RS-485 Serial Port Step 1 Use the ClientDemo to log in to the DVR/NVR to check the remote control ID. Step 2 Enter the DVR by RS-485 operation mode on the keyboard.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Step 1 Enter the Dome by RS-485 operation mode on the keyboard. Step 2 Press the Num + CAM buttons to select the dome site. Step 3 Use the joystick and operate the buttons on the keyboard panel to realize the corresponding functions. Please refer to Chapter 1.4 Functional Buttons to check the description of the PTZ control buttons.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Chapter 5 System Menu Configuration On the main menu after login, you can select System to check the version, and configure the system configuration, including network, user, RS-485, RS-422, hardware, time and maintenance. Figure 5-1 Main Menu Refer to Chapter 3.1 Network Settings for the configuration of network parameters. 5.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 5.4 RS-485/RS-422 Settings You can connect the analog dome or DVR with the keyboard via RS-484 serial port, and the MVC/MAG with keyboard via RS-422 serial port. Select RS-485/RS-422 to enter the RS-485/RS-422 settings interface. You can configure the address bit (RS-485 only), baud rate, data bit, protocol (PROT: PELCO-P, PELCO-D, VICON, KALATEL, HIKVISION selectable), stop bit, parity, and copy all settings.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 5.6 Time Settings Select Time to enter the system time settings interface. You can set the value of year, month, date, time format, hour, minute and second. Click OK button or the central button of joystick to save the settings. 5.7 Maintenance Select Maintenance to enter the system maintenance settings interface.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual Chapter 6 Specifications Table 6-1 Specification of DS-1200KI DS-1200KI Model System External Interfaces LCD screen 128 x 64 pixel screen Joystick 4-axis joystick Control mode Network, RS-232, RS-422, RS-485 Network interface 1; 10 M/100 Mbps self-adaptive Ethernet interface Serial interface 1 RS-232, 1 RS-422, 1 RS-485 USB interface 1 × USB 2.0 Power supply 12 VDC Consumption ≤ 4.
DS-1200KI/1006KI Keyboard User Manual DS-6900UDI Decoder User Manual 30
