Data Sheet

DS-1273ZJ-135
Wall Mounting Bracket for Dome Camera
Features:
 Aluminum alloy material with surface spray
treatment
 Design of cable entrance hole
 Better water proof design
 Convenient installation coordinating with adaptor
cap
Dimension:
Order Model:
DS-1273ZJ-135
Parameter:
Model
Parameters
DS-1273ZJ-135
Wall Mounting Bracket for
Dome Camera
Appearance
Hik White
Range of
Application
Suitable for dome camera wall mounting
Material
Aluminum Alloy
Dimension
136×183.5×230mm
Weight
704g
Notice:
 The bracket should be installed on flat wall
 The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
 The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CC52X1P(N)-VP, DS-2CC52X1P(N)-AVPIR2,
DS-2CD2712F-I(S), DS-2CD2732F-I(S)
Installation Step:
① Choose appropriate wall
to install the bracket and
thread the cable
② Fix adaptor to bracket and
thread the cable
③ Screw up and complete
the fixation of adaptor
④ Take off lower dome
and lining
A: Cable entry hole
B: Fastening screw
⑤ Install dome module to
adaptor cap and fix with
screw
⑥ Install lining to inner module
and adjust view of angle
⑦ Install lower dome to
module and screw up
⑧ Installation complete
Note: The actual bracket may vary from the picture above.