Data Sheet

DS-1662ZJ

Pendent Mount Bracket

Features:

 Aluminum alloy material with surface spray

treatment

 General design for indoor/outdoor

 Design of cable entrance hole

 Better water proof with rubber pad design

 With safety rope, the assembling is safer and more

convenient

Dimension:

Order model:

DS-1662ZJ

Parameters:

Model

Parameter

DS-1662ZJ

Pendent Mount (50cm)

Color

Hik white

Feature

Suit for 500mm pendent mount

Material

Aluminum alloy

Dimension

Φ116.5×500mm

Weight

960g

Notice:

 Pay attention to the color matching when select bracket

 The bracket should be installed on the flat surface of a

wall

 The wall must be capable of supporting more than 3

times the total load of the camera and the mount.

The maximum load capacity of the mount is 30KG

Installation steps:

① Choose the appropriate wall to mount the ceiling, ② Twist and fix the screwed pipe after threading

and rubber blanket should be added when assembling outdoors

Note A: Waterproof rubber blanket Note B: Screw hole

③ Fasten the safety rope, thread the line and assemble the ④ Fasten the snap joint fixing screw

speed dome

C: Safety rope hook D: Safety rope E :Snap joint fixing screw.

Note: The figure of Speed Dome in “Installation Step” is only for your reference; please adhere to our real products.

Indoor

Outdoor